Cable Techniques
Cable Techniques Smart Battery Adapter Cap to Hirose 4-Pin 24
$52.99
0.00063325BTC
In stock
ROCCAT C10 Cyan In-Ear Headphone 10mm Driver 32 Ohm 108 dB 3.5mm Connector Detachable Cable 0.08 kg
A cyan in-ear headphone with a 10 mm driver, 32 ohm impedance and 108 dB sensitivity connects via a 3.5 mm plug and includes a detachable cable weighing 0.08 kg
- TypeIn-Ear
- ColorCyan
- Driver Unit10 millimeters
- Frequency Response40000 hertz
- THDIn Ear
- Input Impedance32 ohms
- 10 hybrid drivers per ear for detailed Hi-Fi sound
- Passive isolation up to 30 dB blocks ambient noise
- 108 dB sensitivity delivers loud, clear audio at low power
- Detachable 1.2 m cable with 3.5 mm plug for easy replacement
- Lightweight 0.08 kg alloy-and-resin shell stays comfortable for hours
C10 Cyan In-Ear Hybrid Drivers
The ROCCAT C10 uses ten hybrid drivers per side, combining one dynamic driver with four balanced armature units to cover a frequency range from 7 Hz to 40000 Hz. A PCB frequency dividing board coordinates each driver for a detailed stereo presentation. Passive noise isolation reaches 30 dB.
Detachable Cable and Inline Controls
A 1.2 m detachable cable with 3.5 mm connector adds anti-pull and anti-corrosion durability while allowing easy replacement. The inline module provides HD call microphone function and wired playback control compatible with Android and iPhone devices. The cable weighs 0.08 kg total.
Ergonomic Fit for Extended Sessions
Zinc alloy faceplates and resin cavities are shaped to sit securely in the ear during movement, remaining comfortable for long listening periods. The manufacturer suggests limiting continuous use to 60 minutes for hearing health. The design suits EDM, pop, jazz and country genres.
Highlights
- 10 hybrid drivers per ear for detailed Hi-Fi sound
- Passive isolation up to 30 dB blocks ambient noise
- 108 dB sensitivity delivers loud, clear audio at low power
- Detachable 1.2 m cable with 3.5 mm plug for easy replacement
- Lightweight 0.08 kg alloy-and-resin shell stays comfortable for hours
Specifications
| Brand | ROCCAT |
|---|---|
| Model | C10 |
| Part Number | C10 |
| Type | In-Ear |
| Color | Cyan |
| Driver Unit | 10 millimeters |
| Frequency Response | 40000 hertz |
| THD | In Ear |
| Input Impedance | 32 ohms |
| Signal to Noise Ratio(SNR) | 108 decibels |
| Sensitivity | 108 decibels |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Weight | 0.08 kilograms |
| Noise Cancelling | Passive |
| Wireless Type | Bluetooth |
| Microphone Impedance | ~3K ohm |
| Microphone Frequency Response | 40000 hertz |
| Microphone Signal to Noise Ratio(SNR) | 108 decibels |
| Microphone Sensitivity | 108 decibels |
| Features | passive_noise_cancellation, Detachable, Media Control, touch, Wired, In Ear, hybrid_driver, 32 ohm |
Questions about this item
How often should I replace the detachable cable on the ROCCAT C10 if I use it daily?
The detachable cable is built with anti-pull and anti-bending protection for durability. Replace it only if you notice physical damage or signal loss. The earbuds themselves weigh just 0.08 kg and use a standard 3.5 mm connector.
What limits the ROCCAT C10 during long listening sessions?
The manufacturer recommends sessions of no more than 60 minutes at a time for hearing health. Passive isolation reduces external noise by up to 30 dB, and the 32 ohm impedance works well with most portable devices.
How much heat or noise does the ROCCAT C10 produce when worn all day?
As a passive wired in-ear monitor, the C10 generates no electronic heat and no self-noise. Its 108 dB sensitivity and 32 ohm impedance mean it plays loudly from low-power sources without added noise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black
$4.99
0.00005963BTC
In stock