We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with 90 degree right-angle PCIe x16 slot and gold edge connector

Roby Technology Co., Limited

Roby Technology Co., Limited PCIe Riser Card 90 Degree 16x

SKU CH-70TM-9ZN0D

A right-angle PCIe x16 riser card that redirects a full-length expansion card 90 degrees inside a 1U server chassis without jumpers or drivers

  • TypePCIe Riser Card
  • SpecificationsPCIe x16
  • FeaturesPCI Express , PCI-E , PCIe
  • Right-angle design fits 1U server chassis
  • 16-lane PCIe slot carries full x16 bandwidth
  • Driver-free installation saves configuration time
  • Plastic and electronic-part construction keeps weight low
  • Supports graphics cards, video adapters and NICs

PCIe x16 90-degree riser card

The Roby Technology Co., Limited PCIe riser card provides a right-angle x16 slot for expansion cards. It fits 1U server chassis where vertical clearance blocks full-height add-in boards. The adaptor supports graphics cards, video adapters and network controllers. No drivers are required for operation.

Replaces horizontal PCIe mounting

This riser replaces a standard horizontal slot when the chassis depth or airflow path prevents straight card insertion. The jump is worth it only when the board must sit parallel to the motherboard. It does not add bandwidth or change the electrical interface. Builders needing hot-plug support or additional slots cannot use this adaptor.

Tool-less press-fit installation

The card presses into the motherboard x16 slot and secures with the chassis bracket screw. No jumpers or configuration are needed. Common issues include mechanical interference with tall components on the target card and signal degradation if the riser flexes under heavy coolers. Hot-swap attempts will fail because the design does not support it.

Highlights

  • Right-angle design fits 1U server chassis
  • 16-lane PCIe slot carries full x16 bandwidth
  • Driver-free installation saves configuration time
  • Plastic and electronic-part construction keeps weight low
  • Supports graphics cards, video adapters and NICs

Specifications

BrandAsteriskStore
ModelPCIe Adapter Riser Card
Part NumberPCIe x16 Adapter Riser Card
TypePCIe Riser Card
SpecificationsPCIe x16
FeaturesPCI Express , PCI-E , PCIe

Questions about this item

Does the 90-degree right-angle bracket require a specific low-profile bracket slot in a 1U chassis?

The riser is designed for lateral transfer in a 1U server chassis and uses a standard PCIe x16 bracket opening; no special low-profile bracket is mentioned.

What is the correct orientation when seating the card into the motherboard slot to avoid bending the edge connector?

Align the 16x edge connector squarely with the motherboard PCIe slot and press straight down until the bracket sits flush; the 90-degree turn occurs after the slot, not during insertion.

Will the plastic housing or PCB traces degrade if the installed graphics card runs at sustained high temperatures?

The adaptor uses plastic and electronic parts rated for normal server operating temperatures; no driver or jumper configuration is needed, and the passive design has no active cooling to fail.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.