We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PCIe x1 telephony card with four red FXO modules

Roby Technology Co., Limited

Roby Technology Co., Limited aex410-4o 4 FXO PCIe telephone accessory

SKU CH-W4P9-N94H2

Adds four analogue trunk ports to a PC via PCIe x1 for use with Asterisk, FreePBX, Issabel and DAHDI

  • TypeAdapter
  • SpecificationsAnalog FXS / FXO Card
  • FeaturesSupports Asterisk , Issabel, FreePbx ,AsteriskNow ,Dahdi ...
  • Sports TeamRobyTech
  • Sports LeagueRobyTech
  • Connect up to four PSTN lines with four FXO modules
  • Install in any PCIe x1 slot for broad compatibility
  • Build an Asterisk PBX using open-source software and this card
  • Supported by DAHDI 2.2.0 with MG2 echo cancellation
  • Configure channels via dahdi_genconf and dahdi_cfg tools

Four-port FXO PCIe card for Asterisk PBX builds

The RobyTech aex410-4o installs in a PCI Express x1 slot and provides four FXO interfaces for connecting PSTN lines to an IP PBX. It targets system integrators and small-business IT staff who need analogue trunk connectivity without proprietary hardware.

Sustained call handling with DAHDI drivers

The card uses the DAHDI 2.2.0 stack and MG2 echo cancellation across all four channels. Under continuous traffic the driver maintains channel stability and echo suppression without the latency spikes that can appear in burst-only testing.

Passive cooling and low-profile fit

A 2U low-profile bracket allows installation in shallow rackmount chassis. The board draws power solely from the PCIe slot, adds no active fan noise, and runs within the thermal envelope of typical server airflow.

Highlights

  • Connect up to four PSTN lines with four FXO modules
  • Install in any PCIe x1 slot for broad compatibility
  • Build an Asterisk PBX using open-source software and this card
  • Supported by DAHDI 2.2.0 with MG2 echo cancellation
  • Configure channels via dahdi_genconf and dahdi_cfg tools

Specifications

BrandRobyTech
Modelaex410
Part Numberaex410-4o
TypeAdapter
SpecificationsAnalog FXS / FXO Card
FeaturesSupports Asterisk , Issabel, FreePbx ,AsteriskNow ,Dahdi ...
Sports TeamRobyTech
Sports LeagueRobyTech

Questions about this item

Does the aex410-4o generate noticeable heat or fan noise when handling four PSTN lines continuously?

The card is a passive PCIe x1 adapter with no onboard fan, so it adds no audible noise and draws only the modest power the slot supplies.

What must already be in the PC for the aex410-4o to function?

A free PCIe x1 slot and a supported OS running Asterisk, DAHDI 2.2.0, Issabel, FreePBX or compatible software.

Will the aex410-4o work alongside an older TDM400 or TDM410 card in the same server?

Yes — both use the DAHDI driver stack, so the aex410-4o can coexist with legacy Digium cards; each simply appears as additional DAHDI channels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.