We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular vibration switch with aluminum enclosure and visible internal components

Robertshaw

Robertshaw 6000-107 Vibration Switch DPDT 0.5-7A 24VDC video accessory

SKU CH-6733-2NZ5P

Vibration switch monitors machinery at 0 to 300 Hz with DPDT contacts rated 0.5-7A at 24VDC

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • DPDT contact enables dual-circuit vibration monitoring
  • 5 to 7 A at 24 VDC handles industrial loads
  • Detects 0 to 300 Hz across 0 to 4.5 G horizontal and 3.5 G vertical
  • UL and c-UL certified for Class I Division 1 hazardous areas
  • Remote electrical or manual reset simplifies maintenance

Robertshaw 6000-107 Vibration Switch

The Robertshaw 6000-107 is a vibration switch designed for industrial electrical controls and automation. It detects mechanical malfunctions in machinery and triggers a DPDT contact to signal an alarm or shutdown. The unit suits maintenance engineers and plant operators monitoring rotating or reciprocating equipment. Its transparent aluminium enclosure allows visual inspection of internal components.

DPDT contact rated 0.5 to 7A at 24VDC

The single specification that decides fit is the DPDT contact rated 0.5 to 7A at 24VDC, which determines the switching capacity for your control circuit. The switch operates across a frequency range of 0 to 300 Hz with horizontal sensitivity of 0 to 4.5 G and vertical sensitivity of 0 to 3.5 G. Reset is achieved by remote electrical signal or manual actuation.

Class I Division 1 hazardous-location enclosure

The aluminium enclosure carries a Class I Division 1 Groups B, C and D rating, allowing installation in hazardous locations where flammable gases or vapours may be present. It withstands ambient temperatures from -13 to 144 F. The unit measures 6 In by 6 In by 5.13 In and mounts directly to the monitored structure. It is not suited for applications requiring wireless communication or programmable logic integration.

Highlights

  • DPDT contact enables dual-circuit vibration monitoring
  • 5 to 7 A at 24 VDC handles industrial loads
  • Detects 0 to 300 Hz across 0 to 4.5 G horizontal and 3.5 G vertical
  • UL and c-UL certified for Class I Division 1 hazardous areas
  • Remote electrical or manual reset simplifies maintenance

Specifications

BrandROBERTSHAW
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What does the 0.5 to 7 A rating mean once the switch is installed in a machine?

It shows the maximum current the DPDT contacts can carry at 24 VDC when vibration triggers the switch.

How does the 24 VDC rating limit the way the switch is wired?

The contacts are certified for 24 VDC only; using a higher voltage would exceed the UL and c-UL listing.

What mounting clearance does the 6 by 6 by 5.13 inch aluminium enclosure need?

The housing measures 6 in long, 6 in wide and 5.13 in high, so allow at least that footprint plus wiring space.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.