RoadPro
RoadPro RP-8X9CL 9 ft Mini-8 coax cable with PL-259 connectors
9 ft Mini-8 coaxial cable with soldered PL-259 connectors and 144 braided copper strands for flexible, low-loss CB antenna connections
- TypeOthers
- Low-loss transmission with 144 braided copper strands
- Soldered PL-259 connectors ensure secure SO-239 stud mount fit
- 9 ft Mini-8 coax length suits single CB antenna installs
- Stranded center conductor adds flexibility for tight routing
- Clear jacket allows quick visual inspection of cable condition
9 ft CB coaxial cable
This 9 ft coaxial cable uses Mini-8 construction with soldered PL-259 connectors on both ends. It connects a CB antenna with an SO-239 stud mount to a compatible radio. The stranded centre conductor uses 144 braided copper strands for flexibility during routing.
Practical limits of PL-259 interface
The PL-259 connector mates with SO-239 stud mounts common on single CB antennas. Signal loss increases with cable length, so this fixed 9 ft run suits installations where the radio sits close to the antenna base. Builders needing longer runs or different connector types cannot use this cable.
Mini-8 low-loss construction
Mini-8 cable geometry and the 144-strand copper centre conductor determine the attenuation and flexibility of this assembly. If the installation demands a different impedance, connector style or lower loss per metre, this specific cable will not meet the requirement.
Highlights
- Low-loss transmission with 144 braided copper strands
- Soldered PL-259 connectors ensure secure SO-239 stud mount fit
- 9 ft Mini-8 coax length suits single CB antenna installs
- Stranded center conductor adds flexibility for tight routing
- Clear jacket allows quick visual inspection of cable condition
Specifications
| Brand | ROADPRO R |
|---|---|
| Type | Others |
Questions about this item
Should I pick the 9 ft Mini-8 cable or a different length for my CB antenna?
The 9 ft Mini-8 cable suits most single CB antenna installations using SO-239 stud mounts; choose a different length only if your routing path requires more or less slack.
How does the 144 braided copper strands affect signal loss in my CB radio?
The 144 braided copper strands keep the centre conductor flexible while maintaining low-loss signal transfer between the antenna and radio.
Will the PL-259 connectors fit a standard SO-239 stud mount on my vehicle?
Yes, the soldered PL-259 connectors are designed to mate directly with SO-239 stud mounts used on single CB antennas.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



