We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4 AWG battery cable with flattened copper lugs, 58 inches long

Road Power

Road Power SS58-4 4 AWG 60 VDC Battery Cable with Lugs 400 A 58 in

SKU CH-03JD-PY9AP

4 AWG battery cable with flattened lugs rated for 400 A at 12 V and 58 in length

  • TypeBattery, Switch To Starter
  • Handles 400 A for reliable engine cranking
  • 4 AWG copper minimises voltage drop
  • 58 in length fits common battery-to-starter runs
  • 140 °F rating resists under-hood heat
  • RoHS and SAE compliant for regulated installs

Road Power 4 AWG 58 in Battery Cable

This 4 AWG cable with pre-crimped lugs connects a battery to a starter on 12 V systems rated up to 400 A. It suits automotive, marine and industrial builds that need a ready-made switch-to-starter lead.

Flattened lugs on 4 ga wire install

The 5/16 in stud holes match common starter terminals, while the PVC jacket resists water, grease, sunlight and abrasion. Routing the 58 in length in tight engine bays may require gentle bends to avoid kinking the insulation.

PVC-insulated copper handles sustained 400

The SGT-type construction meets RoHS and SAE standards for continuous duty in high-temperature engine compartments. Voltage drop stays predictable on 12 V circuits, though the 60 VDC rating is not used in standard vehicle wiring.

Highlights

  • Handles 400 A for reliable engine cranking
  • 4 AWG copper minimises voltage drop
  • 58 in length fits common battery-to-starter runs
  • 140 °F rating resists under-hood heat
  • RoHS and SAE compliant for regulated installs

Specifications

BrandRoad Power
TypeBattery, Switch To Starter

Questions about this item

How can I verify the cable handles the rated 400 A after installation?

Check that the flattened lugs sit flat on the 5/16 in studs with no gap, confirm the black PVC insulation shows no cracks, and measure voltage drop under load — it should stay minimal at 12 V.

What comes in the box and what must I supply?

The package includes the 58 in 4 AWG battery cable with pre-crimped copper lugs; you must provide the 5/16 in mounting hardware and any additional heat-shrink or loom if desired.

Which gauge and length combination should I choose for a 60 VDC starter circuit?

This model is a single 4 AWG, 58 in cable rated 400 A at 12 V maximum; select it when the run matches 58 in and the current demand does not exceed 400 A.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.