We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact RFID reader kit with integrated antennas and five cards

RiteAV

RiteAV Proxmark3 Easy V3 Kit 512k Memory RFID Card Printer

SKU CH-P96Q-3Y3XD

RFID reader, writer and cloner for 125 kHz and 13.56 MHz tags with 512 kB memory and integrated antenna

  • Read, write, clone 125 kHz and 13.56 MHz tags with 512 kB firmware memory
  • Built-in antennas remove blind spots and boost low-frequency signal-to-noise ratio
  • Portable USB power replaces internal battery for field sniffing and spoofing
  • Atmel AT91SAM7S512 controller runs latest Iceman firmware from terminal
  • Includes rewritable T5577 fob and changeable UID 1 k MiFare fob for immediate testing

Proxmark3 Easy V3 Kit 512k Memory

The RiteAV Proxmark3 Easy V3 Kit is a research-grade RFID reader, writer and cloner aimed at developers and security professionals. It operates at 125 kHz and 13.56 MHz to read, write, clone and spoof tags such as HID, Indala, T55xx and MiFare Classic 1k. The kit includes an integrated antenna, a rewritable T5577 fob and a changeable UID 1k fob.

USB-powered portable operation

The unit draws 50 to 130 mA at 3.5 to 5.5 V from a USB port, so a laptop or desktop with a free port is the only host hardware required. No internal battery is fitted; a portable power bank can supply the device for offline sniffing or spoofing. The compact 54 mm by 86.6 mm board has no external antenna connectors, reducing the risk of connector damage during transport.

Atmel AT91SAM7S512 controller with Iceman firmware

The 512 kB Atmel controller runs the open-source Iceman firmware, which is flashed and operated from a command-line terminal. Parsing of secret keys and card data is stable with a low error rate, and the built-in high-frequency antenna eliminates blind spots for uninterrupted reads. The low-frequency antenna improves signal-to-noise ratio for higher recognition rates during sustained sessions.

Highlights

  • Read, write, clone 125 kHz and 13.56 MHz tags with 512 kB firmware memory
  • Built-in antennas remove blind spots and boost low-frequency signal-to-noise ratio
  • Portable USB power replaces internal battery for field sniffing and spoofing
  • Atmel AT91SAM7S512 controller runs latest Iceman firmware from terminal
  • Includes rewritable T5577 fob and changeable UID 1 k MiFare fob for immediate testing

Specifications

No published specifications for this item yet.

Questions about this item

What is the current draw when the Proxmark3 Easy V3 runs continuously?

The kit draws 50-130 mA at an operating voltage of 3.5-5.5 V, so sustained use stays within that range.

How much heat or noise does the device produce during all-day operation?

The unit has no fan or moving parts and runs from a 5 V USB supply, so it generates minimal heat and is effectively silent.

Which host computer and port are required to operate the kit?

A laptop or desktop with a USB port is needed to flash firmware and run terminal commands for the Proxmark3.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.