Rip-Tie
Rip-Tie W-75-MRL-RD Hook-and-Loop Cable Tie Roll 75 ft Red
A 75 ft hook-and-loop cable tie roll cuts to length, wraps bundles with 50 lb tensile strength, and resists temperatures from 0 to 220 °F
- Color MappingRed
- TypeCable Management & Conduit
- Cut-to-length roll lets you size every wrap exactly
- 50 lb tensile strength holds heavy cable bundles securely
- 75 ft length covers large installations in one piece
- Nylon and polyethylene construction withstands 0 to 220 °F
- Red colour gives instant visual identification in busy racks
Cable management roll for installers
The Rip-Tie W-75-MRL-RD is a 75 ft hook-and-loop cable tie roll in red nylon and polyethylene. It uses a wrap closure rated at 50 lb tensile strength for bundling wires in electrical and low-voltage work. The material operates from 0 to 220 degrees F and is not flame retardant.
Cut-to-length wrap for variable bundles
The roll replaces pre-cut straps and fixed-length ties by letting you cut exactly what each bundle needs. Width is .75 in and thickness is .08 in, with no mountable base or printed markings. The jump is worth it when bundle diameters change often and you want a reusable wrap instead of single-use plastic ties.
Fits tool bags and service trucks
The 75 ft length stores compactly and feeds straight from the roll without a dispenser. Red colour helps identify power or data runs at a glance. It needs only scissors or a knife to cut and requires no special tools, freeing up space that separate tie packs would occupy.
Highlights
- Cut-to-length roll lets you size every wrap exactly
- 50 lb tensile strength holds heavy cable bundles securely
- 75 ft length covers large installations in one piece
- Nylon and polyethylene construction withstands 0 to 220 °F
- Red colour gives instant visual identification in busy racks
Specifications
| Brand | RIP-TIE |
|---|---|
| Color Mapping | Red |
| Type | Cable Management & Conduit |
Questions about this item
How wide is the 0.75 in hook-and-loop roll and will it wrap around my cable bundle?
The roll is 0.75 in wide and can be cut to any length up to 75 ft, so you simply cut off what you need and wrap it around bundles of variable diameter.
Do I need screws or adhesive to mount the tie, or does it fasten on its own?
The tie is not mountable; it uses a wrap closure that secures by pressing the hook side to the loop side — no hardware or adhesive required.
When should I replace the roll if it sees temperatures up to 220 °F?
The nylon and polyethylene material is rated for 0 °F to 220 °F; replace the roll if it becomes brittle, loses grip, or shows melting after prolonged exposure near the upper limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains XS12JK-3 3P 12mm Round Socket Male Female Aviation Connector
- Electrical Wire Con…



