Rip-Tie
Rip-Tie Hook-and-Loop Cable Tie Roll 75 ft Orange .5 in 50 lb
A 75-foot roll of orange hook-and-loop cable ties with .5-inch width and 50 lb tensile strength for custom-length bundling
- Color MappingOrange
- TypeCable Management & Conduit
- Cut-to-length roll lets you size every bundle exactly
- 50 lb tensile strength secures heavy cable runs
- 75 ft continuous length covers large installations
- 5 in width fits tight routing spaces
- Nylon and polyethylene construction withstands 0 to 220 °F
Hook-and-Loop Cable Tie Roll
This roll provides 75 feet of orange nylon and polyethylene strap for bundling wires in automotive, industrial or home environments. The hook-and-loop closure wraps around bundles and secures without tools. It is suited for installers who need adjustable, reusable fastening on the job site.
Sustained Load Behaviour
The material carries a tensile strength of 50 lb and operates across a temperature range of 0 to 220 degrees Fahrenheit. Thickness measures .08 inch, giving consistent grip during long-term vibration or thermal cycling. Flame retardant rating is not applied, so the tie should be kept away from direct ignition sources.
Cut-to-Length Width .5 Inch
Width is fixed at .5 inch, which sets the minimum bundle size and the maximum strap surface contact. Users cut the exact length required from the roll, eliminating waste from pre-cut pieces. Buyers who need a narrower or wider strap, or a pre-cut assortment, will need a different product.
Highlights
- Cut-to-length roll lets you size every bundle exactly
- 50 lb tensile strength secures heavy cable runs
- 75 ft continuous length covers large installations
- 5 in width fits tight routing spaces
- Nylon and polyethylene construction withstands 0 to 220 °F
Specifications
| Brand | RIP-TIE |
|---|---|
| Color Mapping | Orange |
| Type | Cable Management & Conduit |
Questions about this item
Does the 50 lb tensile strength hold up in continuous heat up to 220 °F?
The tie is rated for 0 °F to 220 °F and maintains its 50 lb tensile strength across that range, so all-day heat inside an engine bay or equipment cabinet will not weaken the grip.
What tools or fasteners do I need to install the 0.5 in wide roll?
No tools or separate fasteners are required; the hook-and-loop material wraps onto itself and you simply cut the 75 ft roll to the length you need with scissors or a knife.
Will the 0.08 in thick nylon and polyethylene wrap damage older insulation on legacy wiring?
The soft hook-and-loop closure has no sharp edges or adhesive, so it bundles legacy cables without abrading or stressing brittle insulation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains XS12JK-3 3P 12mm Round Socket Male Female Aviation Connector
- Electrical Wire Con…



