RIMLANCE
RIMLANCE RLR21300Q4C2K128 128GB (2x64GB) DDR4 2666 PC4-21300 LRDIMM 4Rx4 server RAM
A 128 GB DDR4 server memory kit with two 64 GB LRDIMM modules at 2666 MHz
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- Rank4Rx4
- 128 GB total capacity from two 64 GB modules
- DDR4 2666 MHz speed with PC4-21300 bandwidth
- Load-reduced DIMM design reduces electrical load on the memory bus
- 4Rx4 rank organisation increases density per module
- 2 V operation lowers power draw per gigabyte
Server Memory Kit
This RIMLANCE kit delivers 128GB of DDR4 server memory across two 64GB LRDIMM modules. It operates at 2666MHz with a PC4-21300 data transfer rate. The registered, ECC design uses a 4Rx4 rank configuration and major brand chipsets. It is built for multi-socket servers and workstations that require high-density, load-reduced DIMMs.
Target Use Cases
This memory suits administrators upgrading or populating servers that accept 288-pin DDR4 LRDIMMs with a 4Rx4 organisation. It fits virtualization hosts, database nodes, and other memory-intensive workloads needing registered ECC stability. Buyers whose platforms only support standard RDIMMs or lower-rank configurations should look at something else. Systems limited to lower maximum module densities cannot use these 64GB sticks.
Deciding Specification
The 4Rx4 load-reduced DIMM organisation is the single specification that determines compatibility. Your motherboard and CPU memory controller must explicitly support LRDIMM technology and this rank structure. Without that support the modules will not function, regardless of speed or capacity matches. Verify the platform qualified-vendor list before purchase.
Highlights
- 128 GB total capacity from two 64 GB modules
- DDR4 2666 MHz speed with PC4-21300 bandwidth
- Load-reduced DIMM design reduces electrical load on the memory bus
- 4Rx4 rank organisation increases density per module
- 2 V operation lowers power draw per gigabyte
Specifications
| Brand | RIMLANCE |
|---|---|
| Model | RLR21300Q4C2K128 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
Questions about this item
What data rate does the DDR4 2666 PC4-21300 interface cap at in practice?
The modules run at 2666 MHz, giving a peak transfer rate of PC4-21300.
What physical slot and clearance does a 288-pin LRDIMM kit need?
Each 64 GB module uses a standard 288-pin DDR4 slot; ensure the server chassis has enough vertical clearance for load-reduced DIMM height.
How are the two 64 GB sticks installed, and which step is often missed?
Populate matched slots per the motherboard manual, then verify the BIOS recognises 128 GB at 2666 MHz and enables ECC.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



