RIMLANCE
RIMLANCE 16GB (2x8GB) DDR3 1600MHz CL11 1.5V SODIMM laptop RAM
A 16 GB DDR3 SODIMM kit (2 × 8 GB) running at 1600 MHz with CL11 latency and 1.5 V operation
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- CAS LatencyCL11
- ECCNo
- Buffered/RegisteredUnbuffered
- 16 GB total capacity for heavy multitasking
- CL11 latency for responsive data access
- 5 V operation reduces power draw
- 204-pin DDR3 SO-DIMM fits standard laptop slots
- 1600 MHz speed handles demanding applications
Capacity and Compatibility
The RIMLANCE kit provides 16GB of DDR3 laptop memory across two 8GB modules. It uses the 204-pin SODIMM form factor and runs at 1600MHz with a CAS latency of 11. The modules are unbuffered, non-ECC and operate at the standard 1.5V for this generation. They suit notebooks that accept DDR3 SO-DIMMs and need a straightforward capacity increase.
Thermals and Power
Operating at 1.5V, the modules draw the standard voltage for DDR3 SODIMMs. No additional cooling is required beyond the laptop's existing thermal solution. The unbuffered design keeps electrical load on the memory controller low. Power consumption scales with workload but remains within the limits defined by the DDR3 SODIMM specification for this voltage.
Build Integration
Installation uses the standard SODIMM slot; no tools or configuration changes are needed beyond seating the modules. The kit frees the single-slot alternative for other upgrades or leaves a slot open on four-slot boards. It does not support ECC or registered operation, so it is not suited to workstations that require those features. Ensure the notebook chipset accepts 8GB density per module.
Highlights
- 16 GB total capacity for heavy multitasking
- CL11 latency for responsive data access
- 5 V operation reduces power draw
- 204-pin DDR3 SO-DIMM fits standard laptop slots
- 1600 MHz speed handles demanding applications
Specifications
| Brand | RIMLANCE |
|---|---|
| Model | RSO12800D8C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| CAS Latency | CL11 |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
How do I install the 204-pin DDR3 SODIMM modules and which step is often missed?
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on each module with the slot key, press firmly until the side clips click, then replace the cover and battery before turning on.
What maintenance or replacement will the 16GB kit need later?
No routine maintenance is required; the unbuffered non-ECC modules have no moving parts or firmware, so replacement is only necessary if a module fails or the laptop is upgraded to a platform that uses a different memory generation.
What limit appears first under sustained use with CL11 1600MHz operation?
The CAS latency of 11 cycles at 1600MHz sets the baseline response time; under heavy sustained workloads the memory controller's throughput ceiling is reached before the modules themselves become a bottleneck.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



