We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

RIITOP

RIITOP M.2 NVMe to USB-C Docking Station 10Gbps JMS583

SKU CH-FWWG-6XCBA

Tool-free M.2 NVMe dock with JMS583 chipset reaches 10Gbps over USB 3.2 Type-C, accepts 2230–2280 M-key drives and works driver-free on Windows, macOS and Linux

  • TypeDock
  • 10 Gbps peak transfer via JMS583 bridge controller
  • Tool-free swap of M-key NVMe SSDs in 2230 2242 2260 2280 sizes
  • Driver-free operation on Windows XP through 10 plus macOS 10.3 and Linux
  • USB 3.2 Type-C link compatible with Thunderbolt 3 and 4 hosts
  • PCIe Gen3 x2 downstream lane for M-key NVMe only no SATA or B-key support

Portable NVMe Dock for M-Key SSDs

This RIITOP dock turns an M.2 PCIe NVMe M-Key SSD into a portable USB-C drive. It uses a JMS583 bridge to reach 10Gbps over USB 3.2 Gen 2. The tool-free slot accepts 2230, 2242, 2260 and 2280 modules without screws. No driver is required on Windows, Linux or macOS 10.3 and later.

Best for users swapping bare NVMe modules

It suits technicians and enthusiasts who move data between multiple M-Key NVMe SSDs and want instant plug-and-play access. It will not work with SATA-based M.2 drives, AHCI protocol SSDs or any B-Key or B+M-Key modules. Buyers needing internal RAID, hardware encryption or a built-in display should look elsewhere.

Tool-free insertion in three steps

Open the dock, slide the NVMe SSD into the M-Key slot until it seats, then connect the USB-C cable to the host. The JMS583 controller handles PCIe Gen3 x2 signalling automatically. The most common issue is inserting a SATA or wrong-keyed SSD, which the dock cannot recognise. Ensure the module is an M-Key PCIe NVMe device before assuming a fault.

Highlights

  • 10 Gbps peak transfer via JMS583 bridge controller
  • Tool-free swap of M-key NVMe SSDs in 2230 2242 2260 2280 sizes
  • Driver-free operation on Windows XP through 10 plus macOS 10.3 and Linux
  • USB 3.2 Type-C link compatible with Thunderbolt 3 and 4 hosts
  • PCIe Gen3 x2 downstream lane for M-key NVMe only no SATA or B-key support

Specifications

TypeDock

Questions about this item

Which SSD form factors and keying does this dock accept?

It accepts M-key M.2 NVMe SSDs in 2230, 2242, 2260 and 2280 lengths; B-key or B+M-key SATA drives are not supported.

Can I connect this dock to a Thunderbolt 3 or 4 port on my laptop?

Yes, the USB-C connector works with Thunderbolt 3 and 4 ports, operating at up to 10 Gbps through the JMS583 bridge.

How do I know the drive is recognised and running at full speed after I plug it in?

The drive should appear in your OS file manager without drivers; check that the USB port reports a 10 Gbps (USB 3.2 Gen 2) connection and run a quick file transfer to verify throughput.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.