We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 9-pin USB 2.0 header splitter hub with four female ports, SATA power connector and adhesive backing

RIITOP

RIITOP 9Pin 1 to 4 USB 2.0 Header Splitter with SATA Power Cable

SKU CH-EDAQ-VEQGF

A 9-pin USB 2.0 header splitter adds four internal ports with SATA power and 3M tape mounting

  • Connector Type9pin USB 2.0 Header 1 to 4 Female Extension Cable
  • Expands one 9-pin header into four USB 2.0 ports for more internal devices
  • SATA power connector delivers stable 500 mA per port to prevent power drops
  • Built-in USB 2.0 chip enables up to 480 Mbps transfer, backward compatible with 1.0
  • 28 AWG pure copper cores with TPC insulation resist heat, oxidation and cable tangles
  • 3M adhesive backing secures the hub inside the chassis for tidy, tool-free mounting

9-Pin USB 2.0 Header Splitter

The RIITOP splitter turns one internal 9-pin USB 2.0 header into four female ports. It is designed for PC builders who need extra internal connections for Wi-Fi receivers, fan controllers, RGB lighting or other USB 2.0 devices. A SATA power connector supplies stable power to all attached devices.

USB 2.0 Bandwidth and Power Limits

The built-in USB 2.0 chip delivers up to 480 Mbps and is backward compatible with USB 1.0. Each port supports a maximum of 500 mA at 5 V, so total current draw across the four ports must stay within the SATA connector's capacity. High-bandwidth peripherals will share the single 480 Mbps channel.

28 AWG Pure Copper with TPC Jacket

The cable uses a 28 AWG pure copper core inside high-temperature TPC material for reliable signal and power delivery. The 3M adhesive tape on the hub body allows secure mounting inside the chassis. This construction resists oxidation and keeps cabling tidy in compact builds.

Highlights

  • Expands one 9-pin header into four USB 2.0 ports for more internal devices
  • SATA power connector delivers stable 500 mA per port to prevent power drops
  • Built-in USB 2.0 chip enables up to 480 Mbps transfer, backward compatible with 1.0
  • 28 AWG pure copper cores with TPC insulation resist heat, oxidation and cable tangles
  • 3M adhesive backing secures the hub inside the chassis for tidy, tool-free mounting

Specifications

Connector Type9pin USB 2.0 Header 1 to 4 Female Extension Cable

Questions about this item

How many devices can I connect with the 1-to-4 USB 2.0 header splitter?

The splitter turns one 9-pin USB 2.0 header into four female ports, letting you connect up to four internal devices such as a WiFi receiver, fan controller or RGB lighting.

What does the 480 Mbps USB 2.0 rating mean for real-world transfers?

The built-in USB 2.0 chip supports up to 480 Mbps theoretical bandwidth, so typical file copies or peripheral data will run at standard USB 2.0 speeds inside your case.

Does the SATA power connector change the 500 mA per-port limit?

The SATA power feed supplies extra current to the hub itself, but each of the four ports is still rated for DC 5 V at 500 mA.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.