We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ridgid 63065 drop head auger 4 in steel finish

Ridgid

Ridgid 63065 Drop Head Auger 4 in Steel

SKU CH-AX0E-J8SEJ

Drop-head auger with 3/8, 1/2 and 5/8 inch connections for K-3800, K-400 and K-50 cable machines

  • Clears tight bends with drop-head design
  • Fits 1-1/2 in and larger drain lines
  • Connects to 3/8 in, 1/2 in, 5/8 in cables
  • Works with K-3800, K-400, K-50 machines
  • Built from steel for heavy-duty use

Drop Head Auger for Sectional Cables

The Ridgid 63065 is a 4 in steel drop head auger built for professional drain cleaning. It connects to C-4, C-6, C-6I C and IW sectional machine cables. The tool fits cleaners in the K-3800, K-400 and K-50 series for commercial plumbing jobs.

Upgrade from Fixed Heads on K-39 and K-40 Machines

This drop head replaces fixed auger heads on compatible Ridgid sectional machines such as the K-39AF, K-39B-1 and K-40 models. The articulated design is worth the switch when cables must navigate multiple bends or P-traps in 1 1/2 in minimum diameter lines. It accepts 3/8 in, 1/2 in and 5/8 in connection sizes.

Sustained Flexibility in Long Cable Runs

Under continuous rotation the drop head maintains its pivot action without binding, letting the cable follow pipe geometry over extended distances. The steel construction resists deformation when the auger encounters repeated obstructions in sectional cable applications. Performance stays consistent across the full length of the run.

Highlights

  • Clears tight bends with drop-head design
  • Fits 1-1/2 in and larger drain lines
  • Connects to 3/8 in, 1/2 in, 5/8 in cables
  • Works with K-3800, K-400, K-50 machines
  • Built from steel for heavy-duty use

Specifications

BrandRIDGID

Questions about this item

What cable sizes does the 63065 drop head auger accept?

The auger connects to 3/8 in, 1/2 in, and 5/8 in cables from the C-4, C-6, C-6I C, IW, and sectional machine cable series.

How is the drop head auger attached to the cable, and what step is often missed?

Thread the auger onto the compatible cable end until fully seated; the step often missed is confirming the connection size matches the cable diameter before tightening.

When should the drop head auger be replaced?

Replace the auger when the drop head shows worn edges, bent arms, or reduced cutting performance on 1 1/2 in minimum diameter drain lines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.