RICHELIEU
RICHELIEU Firenze Collection 7 9/16-inch 192 mm Brushed Nickel cabinet pull hardware
Brushed Nickel cabinet pull with 192 mm hole spacing, 210 mm overall length and 50 mm projection for kitchens or bathrooms
- TypeCabinet & Drawer Hardware
- Sophisticated beaded design elevates kitchen and bathroom style
- 192 mm center-to-center fits standard cabinet drilling
- 210 mm overall length provides comfortable grip
- Brushed nickel Zamak finish resists daily wear
- Included 8/32 screws suit 16–19 mm melamine thickness
Firenze Collection Brushed Nickel Pull
The RICHELIEU Firenze Collection pull is a traditional cabinet and drawer handle finished in Brushed Nickel Zamak. It suits kitchens and bathrooms where a centre-to-centre measurement of 7 9/16 in (192 mm) matches existing drill holes. The overall length is 8 1/4 in (210 mm) with a 1 in (25 mm) width and 2 in (50 mm) projection. Buyers needing a different hole spacing or a slimmer profile should look elsewhere.
Installation and common issues
Mounting hardware is included for an easy installation using 8/32 screws supplied at a standard 1 in (25 mm) length, quadrex pan head. They fit most popular melamine thicknesses ranging between 5/8 in and 3/4 in (16 mm to 19 mm). Misalignment occurs when the 192 mm centre-to-centre distance does not match pre-drilled holes, and the 2 in projection may catch on adjacent doors in tight clearances.
Centre-to-centre 192 mm decides fit
The single specification that determines whether this is the right part is the centre-to-centre measurement of 192 mm. If the existing holes are spaced at this exact distance the pull will mount directly; any other spacing requires new drilling. The included 8/32 screws and Brushed Nickel Zamak finish are secondary to that dimensional match.
Highlights
- Sophisticated beaded design elevates kitchen and bathroom style
- 192 mm center-to-center fits standard cabinet drilling
- 210 mm overall length provides comfortable grip
- Brushed nickel Zamak finish resists daily wear
- Included 8/32 screws suit 16–19 mm melamine thickness
Specifications
| Brand | RICHELIEU |
|---|---|
| Type | Cabinet & Drawer Hardware |
Questions about this item
How can I confirm the Firenze pull aligns correctly after drilling?
Measure the centre-to-centre distance between the installed screws; it must read exactly 192 mm (7 9/16 in) for the handle to sit straight.
What mounting hardware comes with each pull and what might I need to buy separately?
Each unit includes 8/32 quadrex pan-head screws 25 mm (1 in) long, suited for 16 mm to 19 mm thick panels; longer screws must be sourced separately for thicker material.
Which finish and centre-to-centre size should I choose for a consistent kitchen look?
This listing is the Brushed Nickel version with a 192 mm centre-to-centre measurement; match other pulls to the same finish and 192 mm spacing for uniformity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
