RICHELIEU
RICHELIEU 721091 6-Piece Carbide Grit Hole Saw Set pneumatic accessory
Six-piece carbide grit hole saw set cuts smooth holes in tiles and ceramics to a 25 mm depth and includes a mandrel with pilot drill
- Cuts smooth holes in tiles and ceramics
- Carbide grit bonded to high carbon steel
- 25 mm cutting depth for deeper cuts
- Includes mandrel and pilot drill ready to use
- 6-piece set covers multiple hole sizes
RICHELIEU 721091 6-Piece Carbide Grit Hole Saw Set
This RICHELIEU 721091 set provides six carbide grit hole saws designed for cutting tiles and ceramics. It includes a mandrel and pilot drill for immediate use. The abrasive grit is bonded to high carbon steel bodies to produce smooth holes in brittle materials. Suitable for trade professionals and DIY users working with hard surfaces.
Cutting Depth and Material Limits
Each saw offers a cutting depth of 25 mm (1 in) for tile and ceramic work. The carbide grit abrasive cuts without the aggressive teeth that can crack fragile materials. It is not intended for cutting metal, thick stone, or wood where toothed saws perform better. The abrasive edge will wear faster on extremely hard or abrasive composites beyond standard ceramics.
Installation and Common Issues
The supplied mandrel and pilot drill fit standard drill chucks for quick setup. The pilot drill must engage the workpiece first to centre the saw and prevent the grit edge from wandering on smooth tile glazes. Applying excessive feed pressure can overheat the grit bond and reduce cutting life. Running the drill at moderate speed with light pressure yields the cleanest holes.
Highlights
- Cuts smooth holes in tiles and ceramics
- Carbide grit bonded to high carbon steel
- 25 mm cutting depth for deeper cuts
- Includes mandrel and pilot drill ready to use
- 6-piece set covers multiple hole sizes
Specifications
| Brand | RICHELIEU |
|---|
Questions about this item
Which carbide grit hole saw set should I choose for tile and ceramic work?
The 6-piece RICHELIEU 721091 set includes a mandrel and pilot drill, providing an economical solution for cutting smooth holes in tiles and ceramics with a 25 mm cutting depth.
What does the 25 mm cutting depth mean when I am drilling through a tile?
You can drill a clean hole up to 25 mm deep in a single pass, which covers most standard wall and floor tiles without needing to flip the workpiece.
What arbor or mandrel interface does this set use and what does it limit?
The included mandrel fits the supplied pilot drill and carbide grit saws, so the set is limited to the six diameters provided and cannot accept other brand saws without a different arbor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
