We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rheem SP11524Z anode rod 58 by .84 inches cut to fit

Rheem

Rheem SP11524Z Anode 58 x .84 in Cut to Fit

SKU CH-CRYC-GNGCN

A sacrificial anode rod measuring 58 by 0.84 inches, cut to fit Rheem and Vanguard water heaters

  • MaterialHAWA
  • Fits Rheem and Vanguard water heaters for reliable corrosion protection
  • 58 inch cut-to-fit length allows custom sizing for exact tank fit
  • Compatible with 15 Grainger item numbers including 15A515 and 6FGU4
  • Supports 10 manufacturer models from ES120 and GHE100 series
  • New condition ensures full anode life from first installation

Rheem SP11524Z Anode Assembly

The Rheem SP11524Z is a replacement anode assembly designed for Rheem and Vanguard water heaters. It measures 58 by .84 inches and is cut to fit during installation. The anode uses HAWA material to protect the tank from corrosion. This new part fits specific models listed by the manufacturer.

Suits owners of listed Rheem and Vanguard heaters

This anode fits heaters with manufacturer model numbers including ES120 series and GHE100 series. It also matches Grainger item numbers 15A515, 15A516, 3CFH3, 3CFH4, 3CFH5, 6E745, 6E746, 6E747, 6FGU4, 6FGU5, 6FGU6 and 6FGU7. It is not for heaters outside these model lists or for other brands.

58 by .84 inch cut-to-fit length

The critical specification is the 58 by .84 inch dimension that must be trimmed to match the tank. Verify the heater model number against the ES120 and GHE100 series before ordering. The HAWA material composition is fixed and cannot be changed. No other dimensions or materials are offered for this part number.

Highlights

  • Fits Rheem and Vanguard water heaters for reliable corrosion protection
  • 58 inch cut-to-fit length allows custom sizing for exact tank fit
  • Compatible with 15 Grainger item numbers including 15A515 and 6FGU4
  • Supports 10 manufacturer models from ES120 and GHE100 series
  • New condition ensures full anode life from first installation

Specifications

BrandRHEEM
MaterialHAWA

Questions about this item

How do I install the Rheem SP11524Z anode and what step is often missed?

Shut off water and power, drain the tank, remove the old anode from the top port, cut the new 58 inch rod to match the original length, apply thread sealant, and tighten securely; the step often missed is cutting the rod to the exact tank depth before inserting it.

When will this anode need replacement?

The HAWA material anode sacrifices itself to protect the tank; plan to inspect it annually and replace it once the core wire is exposed or the rod has eroded to less than half its original diameter, typically every three to five years depending on water chemistry.

What limit appears first during sustained use of this anode?

The sacrificial HAWA material depletes over time; the first limit is the rod wearing down until it can no longer protect the tank lining, which shows as accelerated corrosion at the tank's top seam or a rotten-egg smell in hot water.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.