We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper threaded water heater element, 7.56 inch insert length

Rheem

Rheem SP10874FH 1500W 120V 1" Threaded Bathware Element

SKU CH-8NQY-3B0DB

A 1500 W, 120 V threaded copper water-heater element with a 7.56 in insert length

  • TypeTraffic & Parking Lot
  • 1500 W output delivers strong heating power
  • 120 V AC rating matches standard household circuits
  • 56 in insert length fits compatible water heater tanks
  • Copper sheath material resists corrosion for longer life
  • 1 in NPSM threaded mount enables direct pipe installation

Rheem 1500W 120V Threaded Element

This Rheem water heater element delivers 1500 watts at 120 volts AC. It features a 1-inch NPSM threaded mount and a 7.56-inch copper sheath insert length. The medium watt density design suits standard residential replacement needs.

Copper Sheath Performance Under Load

The copper sheath construction transfers heat efficiently during continuous operation. Medium watt density reduces surface scaling compared to high-density alternatives. This design supports steady temperature maintenance in typical duty cycles.

1-Inch NPSM Thread Compatibility

The element uses a 1-inch NPSM thread pattern for installation. Thread engagement depth depends on the tank boss specification. Verify existing heater port dimensions before purchase to ensure proper fit.

Highlights

  • 1500 W output delivers strong heating power
  • 120 V AC rating matches standard household circuits
  • 56 in insert length fits compatible water heater tanks
  • Copper sheath material resists corrosion for longer life
  • 1 in NPSM threaded mount enables direct pipe installation

Specifications

BrandRHEEM
TypeTraffic & Parking Lot

Questions about this item

How much heat does the 1500 W element produce during continuous operation?

The element converts 1500 watts of electrical power directly into heat, so sustained use will raise water temperature steadily until the thermostat cycles it off.

What plumbing fittings must I already have to install this 1" NPSM threaded element?

You need a matching 1" NPSM female port on the tank and a suitable gasket or thread sealant to create a watertight seal.

Will the 7.56 in insert length fit the existing opening on my older water heater?

Measure the tank’s element pocket depth; the 7.56 inch insert requires at least that much clear space plus room for the threads to engage fully.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.