We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular white thermostat with adjustment dial and mounting tabs

Rheem

Rheem SP1082-003 Thermostat SPDT 80-140°F accessory

SKU CH-N5EB-CBFKD

Controls power to heating elements with an 80 to 140°F range and SPDT snap-action switch rated 25 A at 277 V

  • TypeWater Heaters
  • SPDT switch action enables precise limit control
  • 80 to 140 °F temperature range suits residential water heaters
  • 25 A at 277 V contact rating handles high-load elements
  • Snap-action mechanism gives reliable on/off response
  • Compact 6 by 3.9 in size fits standard heater openings

Rheem SP1082-003 Limit Thermostat

This Rheem SP1082-003 thermostat acts as a limit control for residential water heaters. It uses a single-pole double-throw snap-action switch to manage power to the heating elements. The control range spans 80 to 140 degrees Fahrenheit. It is built for direct replacement in compatible Rheem water heater models.

Suits standard electric water heater repairs

Installers replacing a failed high-limit or surface-mount thermostat in a matching Rheem tank will find the correct switch action and temperature span here. Builders needing a three-pole contactor or a control with a lower minimum setting should look at other part numbers. The fixed 6 inch length and 3.9 inch width also limit fitment to specific bracket layouts.

25 A at 277 V contact rating

The double-throw switch carries 25 amperes at 277 volts or 30 amperes at 120 and 240 volts. This rating determines whether the thermostat can directly switch the element load or must drive a separate contactor. Verify the heater element amperage against these figures before specifying the part.

Highlights

  • SPDT switch action enables precise limit control
  • 80 to 140 °F temperature range suits residential water heaters
  • 25 A at 277 V contact rating handles high-load elements
  • Snap-action mechanism gives reliable on/off response
  • Compact 6 by 3.9 in size fits standard heater openings

Specifications

BrandRHEEM
TypeWater Heaters

Questions about this item

How much heat does the SP1082-003 thermostat generate when it runs continuously?

The thermostat is a switch that controls the heating elements; its own heat output is negligible during normal operation.

What existing wiring and voltage supply must I have for this thermostat to function?

It requires a 120/240 V circuit with wiring rated for at least 30 A and a pilot-duty circuit rated for 125 VA at 120/480 V.

Will this thermostat work with the original heating elements in my older Rheem water heater?

Yes, it controls power to standard heating elements up to 3,600 W at 120 V within the 80-140 °F range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.