Rheem-Ruud
Rheem-Ruud EGSP6 6 gal. 120 VAC 16.7 A Commercial Mini Tank Water Heater
A compact 6 gallon electric tank delivering 20 gallons per hour recovery at a 40 degree rise from a standard 120 volt outlet
- TypeOther
- Instant hot water at the point of use with a 6 gal tank
- Fast recovery of 20 gph at a 40 °F rise
- Compact 15.12 in height fits tight spaces
- Simple 120 VAC plug-in operation draws 16.7 A
- Automatic thermostat maintains consistent temperature
Compact 6-Gallon Electric Water Heater
This point-of-use unit delivers hot water directly where it is needed. It operates on a standard 120 VAC supply drawing 16.7 amps. The 2,000-watt single element heats water inside a 6-gallon tank. An automatic thermostat maintains the set temperature for immediate use.
Replaces Central Heater Wait Times
Install this heater at a distant sink or shower to eliminate the wait for hot water from a central tank. The jump is worth it when the pipe run is long enough that wasted water and time outweigh the cost of a dedicated unit. It recovers at 20 gallons per hour based on a 40-degree Fahrenheit rise.
Suits Commercial Indoor Point-of-Use Needs
This model suits commercial restrooms, break rooms, or remote fixtures requiring a dedicated hot water source. The 3/4-inch NPT cold inlet simplifies connection to standard plumbing. Buyers needing a higher first-hour rating or a larger storage volume for continuous heavy demand should look at larger capacity units.
Highlights
- Instant hot water at the point of use with a 6 gal tank
- Fast recovery of 20 gph at a 40 °F rise
- Compact 15.12 in height fits tight spaces
- Simple 120 VAC plug-in operation draws 16.7 A
- Automatic thermostat maintains consistent temperature
Specifications
| Brand | RHEEM-RUUD |
|---|---|
| Type | Other |
Questions about this item
What are the overall height, width and tank diameter of the EGSP6 so I can check cabinet clearance?
The unit measures 15.12 in tall, 15.75 in wide and has a 15.75 in tank diameter.
How is the cold-water inlet connected and what size fitting is required?
The cold inlet uses a 3/4 in NPT thread; apply thread sealant and tighten to the manufacturer's torque spec to prevent leaks.
How often should the heating element be inspected or replaced on this 2000 W single-element heater?
Inspect the element annually for scale buildup and replace it if corrosion or reduced recovery (20 gph @ 40 °F rise) is noticed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Scosche
Scosche 8" PRO Midbass Driver 200W RMS 400W Peak 60-8000Hz 97dB 4Ω 3.75" Depth
$9.99
0.00011954BTC
In stock