We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical 10 gal mini tank water heater 22.87 in tall 15.75 in wide

Rheem-Ruud

Rheem-Ruud EGSP10 120V 10 gal 25 A Commercial Mini Tank Water Heater

SKU CH-2FFE-7MYPS

A 10 gal commercial mini tank delivers 30 gph recovery at a 40 °F rise, runs on 120 V at 25 A with automatic temperature control and a 3/4 in NPT cold inlet

  • TypeOther
  • Instant hot water at the point of use with 30 gph recovery at 40°F rise
  • Compact 22.87 in height fits tight spaces under sinks or in cabinets
  • 10-gallon tank capacity supplies multiple fixtures from a single unit
  • Simple 120 V / 25 A connection plugs into standard commercial circuits
  • Automatic temperature control maintains consistent output without manual adjustment

Point-of-Use 10 gal Electric Heater

This 10 gal commercial mini-tank delivers hot water at the point of use. It operates on a standard 120V single-phase supply drawing 25 A. The single 3,000 W element is managed by an automatic thermostat for hands-free temperature control. It suits light commercial or residential fixtures needing a dedicated hot-water source.

Sustained Recovery at 30 gph

The heater recovers at 30 gph based on a 40 Degrees F temperature rise. Because the tank holds only 10 gal, continuous draw above that rate will deplete stored hot water and the outlet temperature will drop. The automatic thermostat maintains the set point during idle periods but cannot increase the recovery rate beyond the single element's fixed 3,000 W output.

Verify 120 V 25 A Circuit and 3/4 in NPT Connections

Confirm the installation site provides a dedicated 120V circuit rated for at least 25 A. The cold inlet uses a 3/4 in NPT fitting positioned 4.25 in from the bottom, so existing plumbing must align or be adapted. The unit measures 22.87 in high by 15.75 in wide and is rated for indoor environments only.

Highlights

  • Instant hot water at the point of use with 30 gph recovery at 40°F rise
  • Compact 22.87 in height fits tight spaces under sinks or in cabinets
  • 10-gallon tank capacity supplies multiple fixtures from a single unit
  • Simple 120 V / 25 A connection plugs into standard commercial circuits
  • Automatic temperature control maintains consistent output without manual adjustment

Specifications

BrandRHEEM-RUUD
TypeOther

Questions about this item

How much power does the 3,000 W element draw on a 120 V circuit?

The single element consumes 3,000 W at 120 V AC, drawing 25 A on a single-phase supply.

What plumbing connections are required for the cold-water inlet?

The unit has a 3/4 in NPT cold-water inlet located 4.25 in from the base.

Will the 22.87 in height and 15.75 in width fit under a standard counter?

At 22.87 in tall and 15.75 in wide, it fits many counter cavities; measure your opening to confirm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.