We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular RFID reader with USB cable, 2.9 by 1.7 by .5 inches

RF IDEAS

RF IDEAS RDR-80532BKU WAVE ID Plus Mini V3 Black USB SDK RFID Reader

SKU CH-ARVH-HDFA7 MPN RDR-80532BKU

Compact desktop RFID reader reads nearly all proximity and contactless credentials worldwide via USB

  • TypeRFID Reader
  • Form FactorDesktop
  • Power SupplyUSB self-powered
  • Power Consumption65 mA typical, 185 mA maximum
  • FeatureOur smallest and most capable desktop reader yet supports ne
  • Dimensions2.9" x 1.7" x 0.5"
  • Compact desktop footprint at 2.9" x 1.7" x .5
  • USB self-powered operation drawing 65 mA typical and 185 mA maximum
  • Auto-tuning 13.56 MHz antenna optimises read performance across environments
  • Four configurable ID card profiles with two pre-set and two user-definable
  • Wide operating range from -13° to 150°F and 5% to 95% humidity

Compact desktop RFID reader

The RF IDEAS RDR-80532BKU WAVE ID Plus Mini V3 is a new USB self-powered desktop reader measuring 2.9" x 1.7" x 0.5". It draws 65 mA typical and 185 mA maximum, making it suitable for point-of-sale and access-control deployments that need a small footprint.

Installation and common issues

Connect the articulated cable to any standard USB port; the reader is powered entirely from the bus and requires no external supply. Rubber feet keep the unit stable on a desk. The auto-tuning 13.56 MHz antenna adjusts to the local environment, reducing read failures caused by metal surfaces or nearby electronics.

Credential support decides fit

This model supports nearly all proximity and contactless credentials worldwide, including iCLASS ID, SE and Seos on 800 models only. Four ID card configurations are available with two pre-set and all four user definable. Buyers needing a reader limited to a single proprietary format or lacking USB connectivity should choose a different device.

Highlights

  • Compact desktop footprint at 2.9" x 1.7" x .5
  • USB self-powered operation drawing 65 mA typical and 185 mA maximum
  • Auto-tuning 13.56 MHz antenna optimises read performance across environments
  • Four configurable ID card profiles with two pre-set and two user-definable
  • Wide operating range from -13° to 150°F and 5% to 95% humidity

Specifications

BrandRF IDEAS
ModelRDR-80532BKU
TypeRFID Reader
Form FactorDesktop
Power SupplyUSB self-powered
Power Consumption65 mA typical, 185 mA maximum
FeatureOur smallest and most capable desktop reader yet supports nearly all proximity and contactless credentials worldwide.
The small yet powerful credential reader has an extensive feature set that includes:
- Four ID card configurations (2 are pre-set and all four are user definable)
- Auto-tuning for 13.56 MHz antenna to optimize performance in various environments
- User-selectable volume control including a beeper on/off setting
- Support for iCLASS ID, SE and Seos (800 models only)
- New compact and modern design
- Articulated cable and rubber feet provide secure desktop placement
Dimensions2.9" x 1.7" x 0.5"
Weight2.5 oz.
Operating Temperature-13° to 150°F (-25° to 65°C)
Storage Temperature-40° to 185°F (-40° to 85°C)
Humidity5% to 95% relative humidity, non-condensing
Shipping weight0.23 kg
Package size152 × 102 × 51 mm

Questions about this item

How do I verify the WAVE ID Plus Mini V3 is reading credentials correctly after plugging it into USB?

The reader draws 65 mA typical and up to 185 mA maximum from the USB port; if the beeper sounds and the LED responds when a supported credential is presented at 13.56 MHz, the unit is operating as intended.

What comes in the box with the RDR-80532BKU and what must be purchased separately?

The reader ships with an articulated USB cable and rubber feet for secure desktop placement; no separate power supply is needed because it is USB self-powered.

Which configuration should I choose among the four ID card settings on this model?

Two configurations are pre-set and all four are user definable, so you can select the one that matches your credential type — including iCLASS ID, SE or Seos on the 800 models — without extra hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.