We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mini-USB hardwire kit with 13ft cable and fuse holder

Rexing

Rexing Smart Hardwire Kit Mini-USB 12-24V 1.5A 13ft

SKU CH-Z47H-8Q4C2

Powers compatible Rexing supercapacitor dash cams from a 12-24V vehicle supply, adds low-voltage protection at 11.4V or 11.6V.

  • ColorBlack
  • TypeDash Cams
  • 24/7 parking surveillance with G-sensor impact detection and 20-second wake recording
  • Low voltage protection cuts power at 11.4V to prevent battery drain
  • 13ft cable reaches fuse box from any dash cam position
  • 12-24V input suits cars and trucks with 1.5A Mini-USB output
  • Works with Rexing supercapacitor models V1-4K, V3, V5 series and more

Hardwire Kit for Rexing Supercapacitor Dash Cams

This 13ft Mini-USB hardwire kit powers compatible Rexing supercapacitor dash cameras from a vehicle 12-24V electrical system. It supplies a regulated 5V, 1.5A output through a Mini-USB connector and includes a 15A mini-type fuse for circuit protection. The kit is designed for drivers who want continuous parking surveillance without using the cigarette-lighter socket.

Low-Voltage Cut-Off and Vehicle Compatibility Limits

The unit monitors battery voltage and disconnects power at 11.4V on a 12V system or 11.6V as specified for 12V vehicles, preventing a flat battery after the ignition is off. It accepts DC input from 12V up to 24V, so it works in both passenger cars and light commercial vehicles. Operating temperature range spans -30°C to 75°C (-22°F to 167°F), covering extreme climates.

Not for Rexing Battery-Powered Models

This kit will not work with Rexing battery-based cameras such as the V1 Basic, M1, M1 Pro, M2, M3, V2 or V360. Buyers who own those models need a different power solution. The 13ft cable length suits most cabin-to-fuse-box routes, but installers requiring a longer run must source an extension separately.

Highlights

  • 24/7 parking surveillance with G-sensor impact detection and 20-second wake recording
  • Low voltage protection cuts power at 11.4V to prevent battery drain
  • 13ft cable reaches fuse box from any dash cam position
  • 12-24V input suits cars and trucks with 1.5A Mini-USB output
  • Works with Rexing supercapacitor models V1-4K, V3, V5 series and more

Specifications

ColorBlack
TypeDash Cams

Questions about this item

Which Rexing dash cam models does this hardwire kit support?

It works with all Rexing supercapacitor models including V1-4K, V1P-4K, V3 Basic, V3, V2 Pro AI, V1P-3, V1P Pro, V1 Max, V1P Max, V1GW-4K, V1PGW-4K, S1 Series and V5 Series. It is not compatible with battery models such as V1 Basic, M1, M1 Pro, M2, M3, V2 or V360.

What does the 1.5 A output mean for my camera?

The kit converts a 12 V to 24 V vehicle supply to a steady 5 V at 1.5 A through the Mini-USB port, giving the dash cam enough current for continuous recording and parking-mode features.

How does the 11.6 V low-voltage cutoff protect my battery?

When the vehicle voltage drops to 11.6 V on a 12 V system, the kit shuts off power to the camera, preventing the starter battery from being drained while the car is parked.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.