Revitol
Revitol PWS-605P-1H 600W 1U Server PSU ATX 24-Pin 80 PLUS Bronze
A 600 W 1U server power supply with ATX 24-pin output and 80 PLUS Bronze efficiency, accepting 100-264 V input
- TypeCable Extender
- Delivers 600 W continuous power for dense server racks
- 1U height fits standard rack shelves without wasting vertical space
- 80 PLUS Bronze efficiency lowers heat output and electricity cost
- Active PFC corrects power factor across 100–264 V input range
- 20+4-pin ATX connector plugs straight into server motherboards
Server power supply for rack builds
This 600 W 1U unit fits standard server chassis and delivers ATX 20+4 pin power for motherboards that need a single high-output source. It suits system integrators assembling rackmount compute nodes or storage appliances where space is limited to one rack unit. The bronze-rated efficiency helps keep operating costs predictable in always-on environments.
Slide-in install with active PFC
The supply mounts directly in a 1U bay and connects through the standard 20+4 pin motherboard cable, so no adapter harness is required. Active power-factor correction handles 100-264 V input automatically, removing the need for manual voltage selection. Installers should verify that the chassis airflow path matches the unit's front-to-rear cooling direction before powering on.
Steady output at rated load
Rated output spans 601 W to 700 W, so the supply maintains its full 600 W specification during continuous operation rather than only in short bursts. Bronze certification confirms efficiency above 80 % across typical load ranges, limiting waste heat inside dense racks. The active PFC stage keeps input current stable even when multiple units share a single circuit.
Highlights
- Delivers 600 W continuous power for dense server racks
- 1U height fits standard rack shelves without wasting vertical space
- 80 PLUS Bronze efficiency lowers heat output and electricity cost
- Active PFC corrects power factor across 100–264 V input range
- 20+4-pin ATX connector plugs straight into server motherboards
Specifications
| Type | Cable Extender |
|---|
Questions about this item
How can I verify the PWS-605P-1H is operating correctly after installation?
The unit powers on and delivers stable 600 W output to the server motherboard through the 20+4 pin ATX connector, with active PFC maintaining efficiency across the 100-264 V input range.
What cables and accessories are included with the PWS-605P-1H, and what must I source separately?
The PSU ships with the 20+4 pin ATX cable attached; any additional EPS, PCIe or peripheral cables required by your server chassis must be purchased separately.
Which capacity and efficiency version of the PWS-605P-1H should I select for a 1U server build?
This model is the 600 W, 80 PLUS Bronze unit in a 1U form factor; no other wattage or certification variants exist for the PWS-605P-1H.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



