Revitol
Revitol C1100 650W 1U 8M1HJ DPS-650SB A video accessory
A 650W 1U server power supply with 80 PLUS Bronze efficiency, active PFC, full modular cables and 20+4 pin plus 8 pin CPU connectors
- TypeCable Extender
- 650 W output supports demanding server workloads
- 80 PLUS Bronze certification reduces energy waste
- Active PFC maintains stable input from 90 to 264 V
- Full modular cabling simplifies 20 + 4 Pin and 8 pin connections
- Compact 24 × 9.9 × 3.9 cm 1U form factor fits dense racks
Server PSU for C1100
This 650W unit fits the C1100 platform and delivers up to 700W peak. It uses a full-modular design with a 20+4Pin main connector and an 8-pin CPU connector. The supply carries 80 PLUS Bronze efficiency and active PFC.
Power input and output limits
The supply accepts 90-264V AC input and is rated for 601W to 700W output. Active PFC corrects the power factor across that range. Efficiency meets the 80 PLUS Bronze threshold at typical server loads.
Compatibility checks before ordering
Verify that your chassis accepts a 1U form factor measuring 24 by 9.9 by 3.9 centimetres. Confirm the 20+4Pin and 8-pin connectors match your motherboard. Note the units show cosmetic wear from prior service.
Highlights
- 650 W output supports demanding server workloads
- 80 PLUS Bronze certification reduces energy waste
- Active PFC maintains stable input from 90 to 264 V
- Full modular cabling simplifies 20 + 4 Pin and 8 pin connections
- Compact 24 × 9.9 × 3.9 cm 1U form factor fits dense racks
Specifications
| Type | Cable Extender |
|---|
Questions about this item
Which variant of the Revitol C1100 650W 1U 8M1HJ DPS-650SB A should I choose for a server build?
The unit is supplied as a single 650 W, 1U form-factor PSU with full modular cabling; there are no alternative capacities or versions listed for this model.
What does the 650 W rating mean once the PSU is installed in a server?
It delivers up to 650 W of continuous output with active PFC and 80 PLUS BRONZE efficiency across the 90–264 V input range, using a 20 + 4 pin main connector and an 8 pin CPU connector.
What interface standard does the 20 + 4 pin connector follow and what does it limit in practice?
The 20 + 4 pin ATX main connector and 8 pin CPU connector are standard server PSU interfaces; they cap the unit to motherboards that accept those pinouts and the 601–700 W rating band.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



