Renfroe
Renfroe FR-00.50-A 1000 lb plate clamp vertical 0 to 3/4 in
Lifts steel plates up to 1000 lb and 3/4 in thick with manual lock jaws and a 2 3/8 in load ring
- 1000 lb working load limit for heavy plate handling
- Vertical lift operation with manual open and lock-close action
- Grips material from zero up to 3/4 in thickness
- Steel construction meets ASME BTH-1 standard
- 2 3/8 in load ring fits standard rigging hardware
Vertical plate clamp for 1000 lb loads
This Renfroe FR-00.50-A plate clamp handles vertical lifts up to 1000 lb working load limit. It grips steel plates from zero to three-quarter inch thickness with manual open and lockable manual close operation. The steel body includes a load ring attachment measuring 2 3/8 inches diameter. Designed to ASME BTH-1 standard for lifting applications.
Jaw capacity 0 to 3/4 inch
The clamp accepts material thickness from zero up to 3/4 inch, matching its jaw opening range exactly. Teeth grip the plate surface during vertical lifts. This single specification decides whether the clamp fits your plate stock; thicker material requires a different model.
Load ring and manual lock included
The 2 3/8 inch load ring attaches directly to hoist hooks or slings without extra hardware. Manual open and lockable close let the operator engage and secure the clamp by hand. No separate accessories or software are bundled; the clamp ships ready to rig.
Highlights
- 1000 lb working load limit for heavy plate handling
- Vertical lift operation with manual open and lock-close action
- Grips material from zero up to 3/4 in thickness
- Steel construction meets ASME BTH-1 standard
- 2 3/8 in load ring fits standard rigging hardware
Specifications
| Brand | RENFROE |
|---|
Questions about this item
How does the 1000 lb working load limit apply when the clamp is in a real machine?
The 1000 lb working load limit is the maximum force the clamp is rated for during vertical lifts when used within the 0 to 3/4 in jaw range and locked manually.
What does the ASME BTH-1 standard cap in practice for this clamp?
ASME BTH-1 governs the design and testing of below-the-hook lifting devices, so the clamp meets the structural and safety requirements for its 1000 lb vertical rating.
What does the clamp physically need to fit or mount on a plate?
It needs a plate thickness between 0 and 3/4 in, a jaw opening up to 3/4 in, and a 2 3/8 in attachment diameter for the load ring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
