We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel beam clamp with load ring, adjustable jaws

Renfroe

Renfroe BC-01.50-A Beam Clamp 3000 lb capacity

SKU CH-QVX4-NMKQT

Attaches to flat beams 3 to 7-1/2 inches wide and lifts loads up to 3000 lb

  • TypeWheelbarrows & Carts
  • Lifts heavy loads safely with 3000 lb working limit
  • Fits wide range of beams from 3 to 7-1/2 in jaw opening
  • Secure grip on flat beams 1/4 to 1/2 in thick
  • Durable steel construction meets ASME standards
  • Versatile top or bottom mount with 3 in load ring

Renfroe BC-01.50-A Beam Clamp

The Renfroe BC-01.50-A beam clamp is a vertical lifting clamp rated for a 3000 lb working load limit. It attaches to flat beam flanges between 3 in and 7-1/2 in wide with a thickness range of 1/4 in to 1/2 in. A 3 in diameter load ring provides the attachment point for rigging hardware. The unit meets ASME standards for lifting applications.

Thermals noise and power draw

This mechanical clamp has no motor, electronics or moving parts that generate heat or noise. It draws zero power during operation and adds no thermal load to the surrounding environment. Performance depends entirely on proper manual engagement with the beam flange within the specified width and thickness limits.

Build fit and clearance

The clamp requires a flat beam flange measuring 3 in to 7-1/4 in wide and 1/4 in to 1/2 in thick for secure mounting. It installs from the top or bottom of the beam without permanent modification. Overall dimensions of 11-7/8 in wide, 11-3/4 in high and 5 in deep define the space needed around the beam for clamp clearance and load ring movement.

Highlights

  • Lifts heavy loads safely with 3000 lb working limit
  • Fits wide range of beams from 3 to 7-1/2 in jaw opening
  • Secure grip on flat beams 1/4 to 1/2 in thick
  • Durable steel construction meets ASME standards
  • Versatile top or bottom mount with 3 in load ring

Specifications

BrandRENFROE
TypeWheelbarrows & Carts

Questions about this item

How do I install the BC-01.50-A on a 3 in wide beam and what step is often missed?

Slide the jaws over the flange until the minimum 3 in width engages, then tighten the threaded handle until the clamp seats flat; the step often missed is verifying the beam thickness is between 1/4 in and 1/2 in before lifting.

What maintenance or replacement will the BC-01.50-A need after repeated lifts?

Inspect the steel jaws, load ring and threaded screw for wear, deformation or corrosion before each use; replace the clamp if the jaw opening exceeds 7 1/2 in or the load ring shows elongation.

What limit appears first when the BC-01.50-A is used continuously at its 3000 lb rating?

The working load limit of 3000 lb is the governing limit; sustained loading at that capacity requires strict adherence to ASME inspection intervals to avoid permanent deformation of the clamp body.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.