We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Light yellow vegetable hydraulic oil in a 5 gal pail

Renewable Lubricants

Renewable Lubricants Vegetable Oil Hydraulic Oil ISO 46 5 gal Pail

SKU CH-6X33-28NHS

Vegetable-based hydraulic fluid rated ISO 46 with a viscosity index of 199, operating from -40 to 250 degrees F and a flash point of 469 degrees F in a 5-gallon pail

  • Vegetable oil base reduces environmental impact
  • ISO 46 viscosity suits many hydraulic systems
  • High 199 viscosity index keeps film stable across temperatures
  • Operates from -40 °F to 250 °F for wide climate range
  • 469 °F flash point adds fire safety margin

ISO 46 vegetable hydraulic fluid

Renewable Lubricants vegetable oil hydraulic fluid carries an ISO viscosity grade of 46 for industrial and mobile hydraulic systems. The vegetable base oil suits operators who need a biodegradable fluid for environmentally sensitive sites. It arrives in a 5 gallon pail ready for reservoir filling.

Biodegradable base oil benefit

The vegetable oil base reduces environmental impact if leaks occur in agriculture forestry or marine applications. A high viscosity index of 199 keeps viscosity stable across wide temperature swings. A flash point of 469 degrees Fahrenheit adds a margin of safety in hot running equipment.

Simple pail handling and cold limits

The 5 gallon pail pours directly into reservoirs without special tools or fittings. Minimum operating temperature reaches minus 30 degrees Fahrenheit and pour point is minus 40 degrees Fahrenheit. Systems that require an SAE viscosity grade or NSF food grade rating cannot use this fluid.

Highlights

  • Vegetable oil base reduces environmental impact
  • ISO 46 viscosity suits many hydraulic systems
  • High 199 viscosity index keeps film stable across temperatures
  • Operates from -40 °F to 250 °F for wide climate range
  • 469 °F flash point adds fire safety margin

Specifications

BrandRENEWABLE LUBRICANTS

Questions about this item

How often will the vegetable-oil hydraulic fluid in this 5-gal pail need to be changed?

Replace it based on your system's service schedule and oil-analysis results; the fluid's high viscosity index of 199 and flash point of 469 °F support long intervals, but contamination and thermal load dictate the actual change frequency.

What is the first limit reached when the fluid runs continuously at high temperature?

The maximum operating temperature is 250 °F; sustained operation above this point risks accelerated oxidation and viscosity loss even though the flash point is 469 °F.

How hot does the fluid get and does it create fumes during all-day operation?

In normal service the fluid stays below its 250 °F rating; the high flash point of 469 °F means minimal vapour or fume generation at typical hydraulic temperatures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.