MSD Ignition 84747 Ford Crate Engine Ignition Kit 351C-460
- Ford Crate Engine D…
- 8.80"
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Renewable Lubricants
Biodegradable 2-cycle engine oil for mopeds, scooters and snowmobiles meets API TC and NMMA TC-WII standards with a bio-synthetic base
This one-quart bottle contains a bio-synthetic two-cycle engine oil coloured blue for easy identification. It meets API TC and NMMA TC-WII standards and is intended for mopeds, motor scooters and snowmobiles. The formulation is biodegradable and has a mild odour.
Pour the required amount directly into the fuel tank or oil reservoir according to the engine manufacturer's mixing ratio. The blue tint helps confirm the oil has blended with the petrol. The only common issue is using an incorrect mix ratio, which can cause excessive smoke or insufficient lubrication.
The TC-WII specification covers air-cooled two-cycle engines typical of older personal watercraft and snowmobiles. It does not address the higher-temperature demands of modern direct-injection outboards that require TC-W3 or FC-W ratings. Cold-flow performance is rated to a pour point of -27 °F and a flash point of 356 °F. Viscosity at 100 °C is 10.4 cSt with a specific gravity of 0.90 at 60.1 °F.
| Brand | RENEWABLE LUBRICANTS |
|---|
After filling, start the engine and verify the exhaust shows the normal blue-tinted smoke from the biodegradable base; the mild odour and 356 °F flash point mean no unusual fumes should appear.
The package contains one 1 qt bottle of bio-synthetic 2-cycle oil meeting API TC and NMMA TC-WII standards; no extra additives or containers are needed for mopeds, scooters or snowmobiles.
This 1 qt bottle is the only size offered under part 85211 and carries no SAE or ISO viscosity rating; its 10.4 cSt at 100 °C and -27 °F pour point suit the listed 2-cycle applications.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?