Remgrit
Remgrit G010M 5/8" Carbide Grit Hole Saw pneumatic accessory
Cuts abrasive materials such as tile, glass, and stone with durable carbide grit
- Carbide grit cuts abrasive materials cleanly
- 5/8 inch diameter suits common pipe sizes
- Remgrit brand specialises in grit-edge tooling
- New condition guarantees full factory performance
- First listed by manufacturer March 27 2024
Remgrit G010M Carbide Grit Hole Saw
The Remgrit G010M is a 5/8 inch carbide grit hole saw designed for pneumatic power tools. It targets tradespeople who need to cut clean holes in hard materials such as tile, stone, glass or composites. The grit edge provides an alternative to toothed saws where chipping or cracking is a concern. This accessory fits standard arbors used in professional workshop environments.
Pneumatic drive limits and material constraints
The tool relies on a pneumatic power source, so cutting speed and torque depend entirely on the air supply pressure and volume available at the worksite. Carbide grit cuts by abrasion rather than shearing, which generates more heat and requires steady feed pressure to avoid glazing the cutting surface. It is not suited for thick mild steel or high-volume production drilling where toothed bi-metal saws remove material faster. Operators must match the air tool RPM to the diameter to prevent premature wear.
5/8 inch capacity and typical headroom
The 5/8 inch diameter handles single holes for pipe, conduit or fastener clearance in brittle or abrasive substrates. It offers enough depth for standard wall and floor thicknesses encountered in renovation work. The grit edge wears gradually, so the saw remains usable after many cuts in ceramic or fibreglass, but it will run out of cutting life quickly in hardened metals or deep structural timber. Users needing larger diameters or faster metal removal should select a different saw type.
Highlights
- Carbide grit cuts abrasive materials cleanly
- 5/8 inch diameter suits common pipe sizes
- Remgrit brand specialises in grit-edge tooling
- New condition guarantees full factory performance
- First listed by manufacturer March 27 2024
Specifications
| Brand | REMGRIT |
|---|
Questions about this item
Should I pick the 5/8" carbide grit hole saw for my job?
The 5/8" diameter suits holes of that exact size in materials such as tile, stone or cast iron where carbide grit cuts cleanly without snagging.
How does the 5/8" cutting diameter perform in a hand-held drill?
At 5/8" the saw removes a narrow kerf, so a standard cordless drill delivers enough torque for steady progress without binding.
What shank style does the G010M use and what chucks accept it?
The G010M fits a standard round shank, so it locks into any three-jaw drill chuck or quick-change adapter sized for 5/8" accessories.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
