We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 2-way solenoid valve with 1-inch ports and silver coil

Red Hat

Red Hat ASCO SC8215B050 Solenoid Valve 2-Way 1 in

SKU CH-GAAS-V6FNF

A 2-way normally closed solenoid valve with a 1-inch port, aluminium body, NBR seals and a Cv of 21 for air or inert gas up to 25 psi at 110 or 120 V AC

  • TypeOther
  • 2-Way normally-closed operation controls flow precisely
  • High-flow design with Cv 21 handles large volumes
  • 1 inch NPT connection fits standard piping
  • Aluminium body resists corrosion in air systems
  • 110/120 V AC coil suits common power supplies

Red Hat ASCO SC8215B050 Solenoid Valve

The Red Hat ASCO SC8215B050 is a two-way, normally closed solenoid valve designed for high-flow fluid control. It features a one-inch nominal pipe size and a 1 5/8 inch orifice diameter constructed from an aluminium body with NBR seals. The valve operates on 110V AC or 120V AC power and delivers a coefficient of volume (Cv) of 21 for efficient media handling.

Suits air and inert gas lines up to 25 psi

This valve suits installations controlling air or inert gas where a maximum operating pressure differential of 25 psi is required. It is not rated for fuel gas or fuel oil service, so buyers needing compatibility with those media should look at alternative valve types. The normally closed configuration fits systems that must block flow until energised, while processes requiring normally open operation will need a different starting configuration.

Verify voltage, pressure and media compatibility

Before ordering, confirm that your supply voltage matches the 110V AC or 120V AC coil rating and that your system pressure does not exceed the 25 psi differential limit for air or inert gas. Check that the one-inch pipe connection and 1 5/8 inch orifice align with your existing plumbing layout. Ensure the aluminium body and NBR seal materials are chemically compatible with the specific media flowing through your application.

Highlights

  • 2-Way normally-closed operation controls flow precisely
  • High-flow design with Cv 21 handles large volumes
  • 1 inch NPT connection fits standard piping
  • Aluminium body resists corrosion in air systems
  • 110/120 V AC coil suits common power supplies

Specifications

BrandASCO
TypeOther

Questions about this item

What pipe size and thread type must my plumbing have for this 1 in ASCO valve?

The valve is built for a nominal 1 in pipe with an orifice of 1 5/8 in, so your supply line and fittings must match that size.

Will the 110V AC or 120V AC coil operate correctly on a standard US household circuit?

Yes, the coil is rated for both 110V AC and 120V AC, matching typical residential voltage.

How can I confirm the valve opens when energised and closes when power is removed?

Apply 110V–120V AC; the valve should open and allow flow up to 25 psi air or inert gas differential, then shut tightly when voltage is cut.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.