We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 2-way solenoid valve, 1-inch pipe, 120V AC, normally closed

Red Hat

Red Hat ASCO SC8210G054 Solenoid Valve 2-Way 1 in 120V AC 150 psi 13 Cv

SKU CH-XC8A-Q81VV

Two-way normally-closed brass solenoid valve with 13 Cv flow, 150 psi air rating, 120 V AC coil and 1 in NPT port for air, inert gas, light oil or water

  • TypeOther
  • High flow capacity with 13 Cv rating
  • Reliable shut-off via normally closed design
  • Handles air, inert gases, light oil and water
  • Brass body resists corrosion in wet environments
  • Operates at 120V AC with 150 psi max pressure

ASCO SC8210G054 2-Way Solenoid Valve

The ASCO SC8210G054 is a 2-way, normally closed solenoid valve with a 1 inch nominal pipe size. It features a brass body and NBR seals rated for air, inert gases, light oil and water. The valve delivers a flow coefficient of 13 Cv and operates on 120V AC power. It is designed for high-flow fluid control in commercial and industrial piping systems.

Suits 120V AC systems needing normally closed

This valve suits installations requiring on/off control of compatible media at pressures up to 150 psi. It is not for applications requiring fuel gas or fuel oil service, as maximum pressure differentials for those media are not applicable. Buyers needing a normally open configuration or a different voltage should look at other models. The 1 inch orifice matches the pipe size for full-port flow.

150 psi maximum operating pressure differential

The key specification is the 150 psi maximum operating pressure differential for air and inert gas. This limit determines whether the valve can handle the system pressure without leaking or failing to actuate. Verify that your supply pressure stays within this rating before selecting the SC8210G054. The 13 Cv flow factor and 120V AC coil voltage are the other fixed parameters that must match the application.

Highlights

  • High flow capacity with 13 Cv rating
  • Reliable shut-off via normally closed design
  • Handles air, inert gases, light oil and water
  • Brass body resists corrosion in wet environments
  • Operates at 120V AC with 150 psi max pressure

Specifications

BrandASCO
TypeOther

Questions about this item

How can I verify the valve opens correctly once it is wired to 120V AC?

Apply 120V AC to the coil and confirm that air, inert gas, light oil or water flows through the 1 in brass body; the valve is normally closed, so flow should start only when energised.

What comes with the SC8210G054 and what must I source separately?

The valve body with 1 in NBR-sealed orifice and 13 Cv rating is supplied; you must provide 1 in piping, a 120V AC power source and any required fittings or thread sealant.

Which pressure rating should I match when selecting this model?

Choose this version when your system operates at or below 150 psi differential for air or inert gas; the 13 Cv flow coefficient suits high-flow 1 in line requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.