We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ASCO EF8215C053 solenoid valve, aluminum body, 1 inch pipe connection

Red Hat

Red Hat ASCO EF8215C053 Solenoid Valve 2-Way 1 in

SKU CH-QZQ7-1CSVQ

A 2-way normally open solenoid valve with a 1-inch pipe size, aluminum body and 22 Cv flow capacity for air or inert gas up to 25 psi

  • TypeOther
  • High flow capacity with a Cv of 22
  • Explosion-proof and watertight coil enclosure for safety
  • Normally open 2-way configuration for reliable flow control
  • Aluminum body with NBR seals for durability
  • Operates on 110V AC and 120V AC power

What this valve is and who it fits

The ASCO EF8215C053 is a 2-way, normally-open solenoid valve with a 1 in nominal pipe size and a 1 5/8 in orifice. Its aluminum body and NBR seals suit air or inert gas lines up to 25 psi differential. The explosion-proof, watertight coil runs on 110V or 120V AC. It is built for high-flow industrial or commercial plumbing where fail-open operation is required.

Check your piping and voltage before ordering

Verify that the line size matches the 1 in nominal connection and that the media is compatible with aluminum and NBR. Confirm the system pressure stays within the 25 psi maximum differential for air or inert gas. Ensure the supply voltage is 110V AC or 120V AC to match the coil rating. This valve is not rated for fuel gas or fuel oil service.

Heat, noise and power in normal use

The explosion-proof coil enclosure contains heat and limits external surface temperature during continuous energising. AC solenoid operation produces a low audible hum typical of this valve class. Power draw is determined by the 110V/120V AC coil specification. The aluminum body helps dissipate heat from the fluid path while the watertight seal keeps moisture out of the coil compartment.

Highlights

  • High flow capacity with a Cv of 22
  • Explosion-proof and watertight coil enclosure for safety
  • Normally open 2-way configuration for reliable flow control
  • Aluminum body with NBR seals for durability
  • Operates on 110V AC and 120V AC power

Specifications

BrandASCO
TypeOther

Questions about this item

What comes in the box with the ASCO EF8215C053 solenoid valve, and do I need to buy a coil or connector separately?

The valve body with an aluminum construction, NBR seals, and an integrated explosion-proof watertight coil enclosure for 110V AC or 120V AC operation is supplied. No separate coil or connector purchase is required.

Should I choose the 110V AC or the 120V AC version for my installation?

The single unit is rated for both 110V AC and 120V AC, so there is no separate version to select; it will operate on either supply voltage.

What does the Cv 22 rating mean for actual flow through a 1-inch line at the 25 psi air pressure limit?

A Cv of 22 indicates the valve can pass 22 US gallons per minute of water with a 1 psi drop; for air or inert gas at the maximum 25 psi differential it delivers high-flow capacity suitable for 1-inch piping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.