We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze angle body piston valve 1/2 inch normally closed

Red Hat

Red Hat 8290A384 Angle Body Piston Valve 1/2 in 5.7 Cv

SKU CH-D2FX-AZVX8 MPN 8290A384

Angle body piston valve with 1/2 in orifice and 5.7 Cv, bronze construction, FKM seals, normally closed operation rated to 240 psi water and 150 psi steam up to 366 °F

  • TypeDrain Components
  • Handles 5.7 Cv flow for efficient drainage
  • Operates at 0 psi minimum differential for low-pressure starts
  • Withstands 240 psi water pressure for robust service
  • FKM seals tolerate 366 °F fluid temperature
  • Bronze body rated for indoor and outdoor use

Angle Body Piston Valve 1/2 in

This Red Hat 8290A384 is a normally closed angle body piston valve designed for drain and trap installations. It suits plumbing professionals and facility managers who need reliable on-off control for steam or water lines in indoor and outdoor environments.

5.7 Cv capacity and pressure limits

The valve delivers a flow coefficient of 5.7 through a 1/2 in orifice. It operates from 0 psi minimum differential up to 150 psi for steam and 240 psi for water, with a maximum fluid temperature of 366 Degrees F. Beyond those pressure or temperature limits the valve is not rated for service.

Bronze body and FKM seals

The bronze body and FKM seal material provide compatibility with steam and water media across the stated pressure and temperature ranges. The two-way, two-position configuration and normally closed start position mean the valve opens only when actuated, simplifying system design for drain and trap applications.

Highlights

  • Handles 5.7 Cv flow for efficient drainage
  • Operates at 0 psi minimum differential for low-pressure starts
  • Withstands 240 psi water pressure for robust service
  • FKM seals tolerate 366 °F fluid temperature
  • Bronze body rated for indoor and outdoor use

Specifications

TypeDrain Components
BrandRed Hat
Model8290A384

Questions about this item

Will the 1/2 in NPT threads on the 8290A384 mate with my existing bronze piping without adapters?

Yes — the valve body has 1/2 in nominal pipe size threads that match standard NPT bronze pipe, so it threads directly into your current line.

How can I verify the 8290A384 is actuating correctly once installed?

Apply inlet pressure up to 240 psi water or 150 psi steam; the piston should lift at 0 psi minimum differential and allow full flow with a 5.7 Cv coefficient.

Does the 8290A384 ship with a coil or connector, or must I order them separately?

The valve body is supplied alone; a compatible Red Hat coil and any required electrical connector must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.