We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve with coil enclosure, quarter inch ports

Red Hat

Red Hat 8262H232LT Solenoid Valve Trap 1/4 in 155 psi

SKU CH-W692-6GFME MPN 8262H232LT

A 2-way normally closed solenoid valve with 1/4 in pipe, 1/8 in orifice, brass body, PTFE seals, 0.35 Cv and 155 psi max air pressure, operating at 110 or 120 V AC

  • TypeDrain Components
  • 2-way normally closed design stops flow until energised
  • 1/4 in pipe size with 1/8 in orifice fits compact lines
  • Brass body with PTFE seals resists corrosion and heat
  • Operates up to 155 psi on air and inert gas
  • Runs on 110 V or 120 V AC without junction box

1/4 in Brass Solenoid Valve

This 2-way normally closed solenoid valve controls air or inert gas flow through a 1/4 inch pipe connection. The brass body and PTFE seals suit industrial fluid handling applications. It operates on 110V AC or 120V AC supply voltage. The unit has a 0.35 Cv flow coefficient.

155 psi Maximum Pressure Limit

The valve handles a maximum operating pressure differential of 155 psi for air and inert gas service. Fuel gas and fuel oil pressure ratings are not applicable for this model. The 1/8 inch orifice diameter determines the flow capacity. Coil enclosure is watertight without a junction box.

Check Voltage and Pipe Compatibility

Verify your system provides 110V AC or 120V AC power before installation. Confirm the 1/4 inch nominal pipe size matches your existing plumbing connections. Ensure the media is air or inert gas within the 155 psi pressure differential limit. This valve is not rated for fuel gas or fuel oil service.

Highlights

  • 2-way normally closed design stops flow until energised
  • 1/4 in pipe size with 1/8 in orifice fits compact lines
  • Brass body with PTFE seals resists corrosion and heat
  • Operates up to 155 psi on air and inert gas
  • Runs on 110 V or 120 V AC without junction box

Specifications

TypeDrain Components
BrandRed Hat
Model8262H232LT

Questions about this item

Which Red Hat 8262H232LT configuration suits my 1/4 in piping system?

This valve has a 1/4 in nominal pipe size, a 1/8 in orifice, brass body, PTFE seals and a 0.35 Cv rating, making it suitable for 1/4 in lines carrying air or inert gas up to 155 psi.

What does the 155 psi pressure rating mean when the valve is installed?

It indicates the maximum operating pressure differential for air or inert gas; the valve will remain closed until energised and will hold back pressures up to 155 psi in service.

How does the 110V/120V AC coil interface affect installation?

The coil operates on 110V or 120V AC without a junction box and features a watertight enclosure, so wiring connects directly to the coil leads in a protected location.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.