We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve body with 1-1/2 inch pipe connections

Red Hat

Red Hat 8220G011 1-1/2 in Solenoid Valve Trap

SKU CH-2ZM6-S4FYC MPN 8220G011

A normally closed 2-way solenoid valve with a 1-1/4 in orifice, brass body, EPDM seals and a 22.5 Cv rating for 110V or 120V AC operation up to 150 psi

  • TypeDrain Components
  • Normally closed design prevents flow until energised
  • Diaphragm and piston construction handles 150 psi air pressure
  • Brass body with EPDM seals resists corrosion
  • 5 Cv rating delivers high flow capacity
  • Operates on 110V or 120V AC supply

1-1/2 in Brass Solenoid Valve

The Red Hat 8220G011 is a 2-way normally closed solenoid valve built for 1-1/2 inch pipe. Its brass body and EPDM seals handle air or inert gas up to 150 psi differential pressure. The diaphragm and piston design delivers a flow coefficient of 22.5 Cv. It operates on 110V or 120V AC supply.

Suits compressed air and inert gas lines

This valve fits systems needing on-off control of air or inert gas at moderate pressure. It is not rated for fuel gas or fuel oil service. Buyers needing normally open operation or different voltage ratings should look elsewhere. The brass construction also limits use with fluids that attack copper alloys.

Steady flow under continuous duty

Under sustained load the coil maintains the closed position without overheating when powered at rated voltage. The diaphragm and piston assembly resists creep during long hold periods. Pressure differential stays stable up to the 150 psi limit for air and inert gas. Continuous energisation does not degrade the EPDM seal material.

Highlights

  • Normally closed design prevents flow until energised
  • Diaphragm and piston construction handles 150 psi air pressure
  • Brass body with EPDM seals resists corrosion
  • 5 Cv rating delivers high flow capacity
  • Operates on 110V or 120V AC supply

Specifications

TypeDrain Components
BrandRed Hat
Model8220G011

Questions about this item

What pipe size and voltage supply do I need to install this 1-1/2 in solenoid valve?

The valve requires a 1-1/2 in nominal pipe connection and operates on 110V AC or 120V AC power.

Will this normally closed valve hold against the 150 psi air line I already have in my shop?

Yes, the maximum operating pressure differential for air and inert gas is rated at 150 psi.

How can I verify the diaphragm and piston are functioning correctly after wiring the 110V AC coil?

When energised, the valve should open and allow flow; when de-energised, it should close tightly with zero leakage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.