We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum solenoid valve with 3/4 inch ports and electrical coil

Red Hat

Red Hat 8215G030 120V AC Aluminum Solenoid Valve Trap

SKU CH-XJ3J-YE0D2 MPN 8215G030

A 120V AC aluminum solenoid valve with 3/4 in pipe size and 5.1 Cv flow coefficient for air and inert gas up to 50 psi

  • TypeDrain Components
  • Normally closed design prevents unwanted flow when de-energized
  • High flow capacity with 5.1 Cv coefficient for efficient operation
  • Aluminum body resists corrosion in air and inert gas systems
  • 120V AC operation compatible with standard industrial power supplies
  • 50 psi maximum pressure differential handles demanding applications

120V AC Aluminum Solenoid Valve

This normally closed, two-way solenoid valve controls air and inert gas flow in plumbing and industrial systems. It operates on 110V or 120V AC power and features an aluminum body with NBR seals. The 3/4 inch nominal pipe size and orifice suit standard line connections.

Suitable for air and inert gas lines up to 50 psi

This valve is not rated for fuel gas or fuel oil service, so installers needing those media must select a different model. Buyers requiring a normally open configuration or higher pressure ratings will also need an alternative part. The aluminum construction may not suit highly corrosive environments.

3/4 inch orifice with 5.1 Cv flow coefficient

This orifice size and flow factor determine the valve’s capacity for air and inert gas applications. Verify that the 50 psi maximum operating pressure differential matches your system requirements. The 120V AC coil voltage must match the available control circuit supply.

Highlights

  • Normally closed design prevents unwanted flow when de-energized
  • High flow capacity with 5.1 Cv coefficient for efficient operation
  • Aluminum body resists corrosion in air and inert gas systems
  • 120V AC operation compatible with standard industrial power supplies
  • 50 psi maximum pressure differential handles demanding applications

Specifications

TypeDrain Components
BrandRed Hat
Model8215G030

Questions about this item

What size pipe thread do I need on my existing line to connect the 3/4 in nominal pipe size on this valve?

The valve has a 3/4 in nominal pipe size and a 3/4 in orifice diameter, so your supply line must match a 3/4 in NPT thread for a proper seal.

Will the 120V AC coil operate correctly if my control panel only supplies 110V AC?

Yes, the coil is rated for both 110V AC and 120V AC, so it will operate reliably on either voltage within that range.

How can I verify the valve is opening fully when energised on my compressed air system?

With air applied up to the 50 psi maximum differential, energise the coil and confirm flow; the high-flow design and 5.1 Cv should deliver full rated capacity when the NBR seals lift.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.