We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve body with coil enclosure, 1 1/2 inch pipe size

Red Hat

Red Hat 8210G056 120V AC Brass Solenoid Valve Trap

SKU CH-BMJV-K05RN MPN 8210G056

A 120V AC brass solenoid valve with a 1 1/4 inch orifice and 22.5 Cv flow rating, normally closed for high-flow drainage control up to 150 psi

  • TypeDrain Components
  • Normally closed design prevents unwanted flow
  • 120V AC coil suits standard mains voltage
  • Brass body resists corrosion in fluid systems
  • High-flow 22.5 Cv handles large volume
  • Watertight coil enclosure protects electrical components

Brass Solenoid Valve 1 1/2 in

The Red Hat 8210G056 is a 120V AC brass solenoid valve with a 1 1/2 inch nominal pipe size and 1 1/4 inch orifice. It operates as a normally closed, two-way high-flow drain component rated for a maximum air or inert gas pressure differential of 150 psi. The valve body uses brass construction with NBR seals and a watertight coil enclosure. It carries a Cv rating of 22.5 for flow capacity.

Installation Suitability

This valve suits plumbing systems requiring 120V AC actuation for on-off control of air or inert gas lines at 1 1/2 inch pipe size. Installers needing fuel gas, fuel oil, or higher pressure ratings should look elsewhere. Buyers who want a normally open configuration or a different voltage will need another model. The Proposition 65 notice also applies for California installations.

120V AC Normally Closed Operation

The valve opens only when the 120V AC coil is energised and closes when power is removed. This normally closed behaviour is the single specification that decides whether the part matches the safety or control logic of the circuit. Verify that the system design calls for power-to-open action before purchasing.

Highlights

  • Normally closed design prevents unwanted flow
  • 120V AC coil suits standard mains voltage
  • Brass body resists corrosion in fluid systems
  • High-flow 22.5 Cv handles large volume
  • Watertight coil enclosure protects electrical components

Specifications

TypeDrain Components
BrandRed Hat
Model8210G056

Questions about this item

Will the 1 1/2 in pipe size and 22.5 Cv flow work with my existing brass piping?

The valve uses a 1 1/2 in nominal pipe size with a 1 1/4 in orifice and brass body, matching standard brass piping of the same size.

How can I verify the 120V AC coil is operating correctly after installation?

Apply 120V AC power and confirm the normally closed valve opens; the watertight coil enclosure protects the electrical connection during operation.

Does the box include the NBR seals and mounting hardware, or must I buy them separately?

The valve ships with the NBR seal material installed in the brass body; no separate seals or mounting hardware are mentioned as included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.