We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel solenoid valve with watertight coil enclosure

Red Hat

Red Hat 8210G037 Solenoid Valve Trap 1/2 in 110V 120V AC

SKU CH-2D63-SAGVX MPN 8210G037

A 2-way, normally closed solenoid valve with a 1/2 in stainless steel body, 7/16 in orifice, 2.2 Cv flow and 150 psi air rating for 110/120 V AC operation

  • TypeDrain Components
  • MaterialHAWA
  • 2-way normally closed design gives reliable on/off control
  • High-flow 7/16 in orifice with 2.2 Cv moves fluid efficiently
  • Stainless-steel body resists corrosion in demanding environments
  • NBR seals handle air and inert gas up to 150 psi
  • Watertight coil enclosure protects 110V/120V AC operation

Industrial Solenoid Valve 1/2 in

The Red Hat 8210G037 is a two-way normally closed solenoid valve built for air and inert-gas service. Stainless-steel body and NBR seals suit industrial plumbing and fluid-control systems that need reliable on-off actuation. It operates on 110 V or 120 V AC with a watertight coil enclosure.

1/2 in NPT Connection Integration

The valve threads into standard half-inch piping and requires a compatible 110/120 V AC control signal. Its 7/16 in orifice and high-flow design free up flow capacity compared with smaller orifices while the watertight coil protects the actuator in wet or wash-down environments.

Cv 2.2 Flow Capacity Headroom

A flow coefficient of 2.2 handles typical air and inert-gas loads up to 150 psi differential pressure. The valve is not rated for fuel gas or fuel oil service so systems using those media must select a different model. Voltage is fixed at 110/120 V AC; other control voltages are not supported.

Highlights

  • 2-way normally closed design gives reliable on/off control
  • High-flow 7/16 in orifice with 2.2 Cv moves fluid efficiently
  • Stainless-steel body resists corrosion in demanding environments
  • NBR seals handle air and inert gas up to 150 psi
  • Watertight coil enclosure protects 110V/120V AC operation

Specifications

TypeDrain Components
MaterialHAWA
BrandRed Hat
Model8210G037

Questions about this item

At what pressure will the 8210G037 stop sealing reliably during continuous air service?

The valve is rated for a maximum operating pressure differential of 150 psi with air or inert gas; sustained use above that limit can prevent positive closure.

How much heat does the coil generate when the valve stays energised all day?

The watertight coil enclosure on the 8210G037 is designed for continuous 110V or 120V AC duty, but the supplier data does not publish a coil wattage or surface-temperature figure.

What pipe fittings must I already have to install this 1/2 in NPT valve?

You need mating 1/2 in NPT pipe threads on both inlet and outlet, plus thread sealant or tape compatible with stainless steel and NBR seals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.