We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve with compact rectangular coil and threaded ports

Red Hat

Red Hat 8210G006 Brass Solenoid Valve 3/8 in 120V AC

SKU CH-HE2V-JA59A MPN 8210G006

A normally-closed brass solenoid valve with a 3/8 in port, 5/8 in orifice and 3 Cv rating for 120V AC operation up to 300 psi

  • TypeDrain Components
  • MaterialBrass
  • Normally closed design prevents unwanted flow when de-energised
  • Brass body resists corrosion in fluid handling applications
  • 3/8 in pipe size suits standard plumbing connections
  • Operates on 120V AC for common industrial power supply
  • Watertight coil enclosure protects against moisture ingress

3/8 in Brass Solenoid Valve

The Red Hat 8210G006 is a normally closed 2-way valve built for high-flow drainage or fluid-control circuits. Its brass body and NBR seals handle air or inert gas up to 300 psi differential pressure. The watertight coil enclosure suits industrial and commercial plumbing installations. Buyers needing larger pipe diameters or different voltage ratings should select another model.

Voltage and Pressure Compatibility

Confirm that the supply circuit provides 110V AC or 120V AC as specified for the coil. Verify that the system operating pressure does not exceed the 300 psi maximum differential for air or inert gas. The valve is not rated for fuel gas or fuel oil service. Ensure the 3/8 in nominal pipe size matches your existing piping before ordering.

Brass Body and Watertight Coil

The brass construction resists corrosion in typical water and air lines while the NBR seal material provides reliable shut-off. A watertight coil enclosure protects the 120V AC winding from moisture and splatter in damp environments. The 5/8 in orifice and Cv 3 rating deliver high flow capacity for drain and trap applications. Threaded 3/8 in connections allow direct installation without adapters.

Highlights

  • Normally closed design prevents unwanted flow when de-energised
  • Brass body resists corrosion in fluid handling applications
  • 3/8 in pipe size suits standard plumbing connections
  • Operates on 120V AC for common industrial power supply
  • Watertight coil enclosure protects against moisture ingress

Specifications

TypeDrain Components
MaterialBrass
BrandRed Hat
Model8210G006

Questions about this item

Does the Red Hat 8210G006 brass solenoid valve include any fittings or wiring in the box, or do I need to buy them separately?

The valve body is brass with a 3/8 in NPT port and a watertight coil for 110/120V AC. Pipe fittings, thread sealant and electrical conduit are not included and must be sourced separately.

Should I choose this 3/8 in, 5/8 in orifice model or a different pipe size for a Cv of 3 and 300 psi air service?

This 3/8 in NPT valve delivers a Cv of 3 with a 5/8 in orifice and handles up to 300 psi air or inert gas. Select a larger pipe size only if you need a higher flow coefficient than 3.

What does the 300 psi air rating mean when the valve is installed in a 120V AC system?

At 120V AC the normally-closed valve opens reliably and holds a maximum operating pressure differential of 300 psi for air or inert gas; the brass body and NBR seals maintain that rating in service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.