We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve with conduit hub and coil enclosure

Red Hat

Red Hat 8210 Solenoid Valve 1 in Bathwares

SKU CH-CJSZ-CKQWV

A pilot-operated, normally open solenoid valve controlling air, inert gases, light oil and water with a 13 Cv flow coefficient and 5–150 psi rating

  • TypeOther
  • Controls air, gas, water and light oil with 13 Cv flow
  • Normally open pilot-operated design opens when energised for fail-safe flow
  • Brass body with NBR seals handles 5 to 150 psi differential pressure
  • Explosion-proof watertight coil with Class F insulation suits indoor and outdoor use
  • Operates from 14 °F to 140 °F ambient with 180 °F max fluid temperature

Pilot-Operated Solenoid Valve

The ASCO EF8210G014 is a pilot-operated, normally open solenoid valve built for controlling air, inert gases, light oil, and water. Its brass body and NBR seals suit industrial and commercial fluid-control systems needing a 1-inch pipe connection. The explosion-proof, watertight coil enclosure with Class F insulation allows installation in demanding indoor or outdoor environments.

Build Integration Requirements

This 2-way, 2-position valve mounts vertically and accepts a 1/2-inch conduit hub for electrical wiring. It operates on differential pressure between 5 and 150 psi for air, gas, and water, or up to 125 psi for light oil. The unit handles ambient temperatures from 14°F to 140°F and fluid temperatures up to 180°F, so surrounding plumbing and wiring must accommodate those ranges.

Included Coil and Enclosure

A coil is supplied with the valve, removing the need to source a separate actuator. The coil sits inside an explosion-proof, watertight housing rated for both indoor and outdoor use, which simplifies compliance in hazardous or wet locations. The 1-second response time supports on-off control cycles without additional timing components.

Highlights

  • Controls air, gas, water and light oil with 13 Cv flow
  • Normally open pilot-operated design opens when energised for fail-safe flow
  • Brass body with NBR seals handles 5 to 150 psi differential pressure
  • Explosion-proof watertight coil with Class F insulation suits indoor and outdoor use
  • Operates from 14 °F to 140 °F ambient with 180 °F max fluid temperature

Specifications

BrandREDHAT
TypeOther

Questions about this item

What is the maximum differential pressure this 1-inch valve can handle with air or water?

The valve is rated for a differential pressure of 5 to 150 psi with air, inert gas, or water.

How hot does the coil enclosure get during continuous operation?

The maximum fluid temperature is 180°F and the operating ambient temperature range tops out at 140°F.

What electrical supply and conduit fitting are required to install this valve?

The valve includes a coil with Class F insulation and a 1/2-inch conduit hub for wiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.