We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve, 1 inch pipe, normally closed, watertight coil

Red Hat

Red Hat 8210 120V AC Brass Solenoid Valve Bathware

SKU CH-JQ6D-BD22Y

A 120V AC brass solenoid valve with 1 inch pipe size and 13 Cv flow coefficient

  • TypeOther
  • 1 in orifice for high flow capacity
  • Normally closed for safe default shut-off
  • Brass body resists corrosion in wet environments
  • Watertight coil enclosure protects electrical components
  • 150 psi air/inert gas rating suits demanding systems

Red Hat 8210 Brass Solenoid Valve

The Red Hat 8210 is a 120V AC brass solenoid valve designed for fluid control in bathware applications. It operates as a normally closed 2-way valve with a high-flow configuration and a 1-inch nominal pipe size. The valve suits installers who need reliable on-off control for water or air lines.

Brass body with NBR seals and watertight coil

The brass body provides corrosion resistance for typical bathware environments while the NBR seal material handles the specified media. A watertight coil enclosure protects the 110V/120V AC winding from moisture ingress during daily operation. The 1-inch orifice and Cv 13 rating indicate the flow capacity available through the valve.

Verify voltage, pressure and media compatibility

Confirm the supply voltage matches 110V AC or 120V AC before wiring the coil. Ensure the system operating pressure does not exceed 150 psi for air or inert gas service. Fuel gas and fuel oil service are not applicable for this valve, so do not install it in those lines.

Highlights

  • 1 in orifice for high flow capacity
  • Normally closed for safe default shut-off
  • Brass body resists corrosion in wet environments
  • Watertight coil enclosure protects electrical components
  • 150 psi air/inert gas rating suits demanding systems

Specifications

BrandREDHAT
TypeOther

Questions about this item

What voltage does the 120V AC coil operate on?

The coil operates on 110V AC or 120V AC as listed in the specifications.

What pipe size and body material are required for installation?

The valve has a 1 in nominal pipe size and a brass body with NBR seals.

How is the coil enclosure rated and what is a common wiring oversight?

The coil enclosure is watertight; a common oversight is failing to seal conduit connections properly to maintain that rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.