We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Hat solenoid valve coil with 18 inch leads

Red Hat

Red Hat 238214-032-D Drain Trap 120V 60Hz 6.1W 18 In Leads

SKU CH-MD54-41W1B MPN 238214-032-D

Solenoid valve coil operates on 110V or 120V at 60Hz with 6.1W power and 18-inch leads for hazardous locations

  • TypeDrain Components
  • Hazardous-location rated coil enclosure protects critical installations
  • Class F insulation withstands elevated operating temperatures
  • 18-inch leads simplify wiring in tight spaces
  • Dual 110V/120V rating suits standard North American power
  • Low 6.1-watt draw reduces energy consumption

Hazardous-location solenoid coil

This Red Hat 238214-032-D coil operates at 120 VAC, 60 Hz and draws 6.1 W. It is built for hazardous-location enclosures without a junction box and carries Class F insulation. Eighteen-inch leads provide the electrical connection.

Installers needing a direct-wire hazardous-area coil

Suits maintenance teams replacing a coil on an existing ASCO valve where a junction box is absent and Class F insulation is required. Not for installers who need a coil with integrated junction box, different voltage, or a plug-in connector.

120 VAC 60 Hz 6.1 W rating

The coil must match the valve's nameplate voltage, frequency and power draw; a mismatch will prevent actuation or damage the winding. Verify the 110 V / 120 V dual rating aligns with the supply before ordering.

Highlights

  • Hazardous-location rated coil enclosure protects critical installations
  • Class F insulation withstands elevated operating temperatures
  • 18-inch leads simplify wiring in tight spaces
  • Dual 110V/120V rating suits standard North American power
  • Low 6.1-watt draw reduces energy consumption

Specifications

TypeDrain Components
BrandRed Hat
Model238214-032-D*

Questions about this item

What solenoid valve body does the 238214-032-D coil fit?

This coil is designed for ASCO solenoid valves that accept a Class F insulated coil with 18-inch leads; confirm your valve model matches the coil voltage and enclosure requirements.

Can I run the 120 V 60 Hz coil on a 110 V supply?

The coil is rated for both 110 V and 120 V at 60 Hz, so it will operate on a 110 V supply within the specified voltage range.

How do I verify the coil is energised after wiring the 18-inch leads?

With 110–120 VAC applied, listen for the valve actuation click and measure approximately 6.1 W input power to confirm the coil is functioning correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.