RECTORSEAL
RECTORSEAL Nokorode Lead Free Soldering Flux 8 oz Paste 14020
Petroleum-based paste flux cleans and fluxes copper, brass and other metals in one step for lead-free or leaded solder joints up to 400 °F
- TypeSoldering Flux
- Lead-free formula meets potable-water standards 61 and 506
- Petroleum-based paste cleans and fluxes copper, brass and nickel in one step
- Special oil base shields solder joints from corrosive attack
- Brush-top 8 oz jar lets you apply flux straight from the container
- Rated to 400 °F active temperature for lead-free, leaded and tin/lead solders
Product Identity
RECTORSEAL Nokorode is an 8 oz lead-free soldering flux paste supplied in a jar with an included brush. It suits plumbers and technicians joining brass, copper, nickel, tin or zinc for potable-water plumbing work.
Installation Notes
The petrolatum-based paste applies directly from the jar using the built-in brush, cleaning and fluxing the joint in one step. Over-application can leave excess residue inside small-diameter pipe, so use a thin, even coat before heating to the 400 °F active temperature limit.
Compatibility Checks
Verify that your solder alloy is lead-free, leaded or tin-lead, as the flux is qualified for all three. Confirm the piping material matches brass, copper, nickel, tin or zinc and that local codes accept the A-A-51145, MIL-F-4995-2, NSF/ANSI 61-G and O-F-506 Type 1A standards. Buyers needing a liquid or water-soluble flux for electronics or sheet-metal work should choose a different formulation.
Highlights
- Lead-free formula meets potable-water standards 61 and 506
- Petroleum-based paste cleans and fluxes copper, brass and nickel in one step
- Special oil base shields solder joints from corrosive attack
- Brush-top 8 oz jar lets you apply flux straight from the container
- Rated to 400 °F active temperature for lead-free, leaded and tin/lead solders
Specifications
| Brand | Nokorode |
|---|---|
| Type | Soldering Flux |
Questions about this item
How can I tell the flux is working correctly after I apply it to a joint?
The paste cleans and fluxes simultaneously, so you should see the metal surface brighten and the solder flow smoothly into the joint at temperatures up to 400 Degrees F.
What comes in the jar and is a brush included?
The 8 oz jar contains petroleum-based paste flux and includes a brush for application.
Which flux should I choose for potable water plumbing with lead-free solder?
This Nokorode paste meets NSF/ANSI 61-G and is formulated for lead-free, leaded and tin/lead solders on copper, brass and other listed metals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
