We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2-inch trap seal round plastic rubber silicone body slip connection

RECTORSEAL

RECTORSEAL 97041 Trap Seal 2 in Black

SKU CH-MVNN-H78YQ

Prevents sewer gases escaping through 2 in floor drains with ASSE 1072 and ICC-ES PMG compliance

  • MaterialHAWA
  • Weight0.2
  • ASSE 1072 and ICC-ES PMG certified for code compliance
  • Slip connection fits 2 in pipe without tools
  • Ligature-resistant design improves safety in institutional settings
  • Plastic, rubber and silicone construction resists corrosion
  • Compact 1 1/4 in height suits shallow floor drains

2-Inch Floor-Drain Trap Seal

The RECTORSEAL 97041 is a slip-fit trap seal designed for two-inch floor drains in commercial and industrial plumbing systems. Its black plastic, rubber and silicone construction meets ASSE 1072 and ICC-ES PMG standards for reliable drain protection.

ASSE 1072 and ICC-ES PMG Compliance

The single specification that determines suitability is certification to ASSE 1072 and ICC-ES PMG for trap-seal performance. Without these listings the device cannot be approved for code-compliant floor-drain installations.

Simple Slip-Fit Installation

Installation requires pushing the seal into a two-inch drain until the 2 1/8-inch overall diameter seats against the pipe. The most common error is attempting to use the seal on a non-standard drain size or omitting the slip connection, which prevents a watertight fit.

Highlights

  • ASSE 1072 and ICC-ES PMG certified for code compliance
  • Slip connection fits 2 in pipe without tools
  • Ligature-resistant design improves safety in institutional settings
  • Plastic, rubber and silicone construction resists corrosion
  • Compact 1 1/4 in height suits shallow floor drains

Specifications

MaterialHAWA
Weight0.2
BrandRECTORSEAL

Questions about this item

How does the ASSE 1072 certification affect daily drain performance?

ASSE 1072 means the seal blocks sewer gas and pests automatically without water, so the trap stays effective even when the drain goes unused for long periods.

What does the slip connection require from the existing pipe?

The slip connection fits a 2 in pipe directly; no threads, solvent or special tools are needed — just push it onto the pipe end.

What clearances does the 2 1/8 in overall diameter need inside the drain body?

The 2 1/8 in diameter seal sits inside a standard 2 in drain opening; allow roughly 1 3/4 in width and 1 1/4 in height for the installed profile.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.