We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black wired gaming headset with interchangeable cat, bear and bunny ears, oval ear cushions and a detachable boom microphone

RAZER

RAZER RZ04-04510100-R3U1 Kraken Kitty V2 Pro gaming headset

SKU CH-TTN0-RVRM9 MPN RZ04-04510100-R3U1

Wired USB headset with interchangeable cat, bear and bunny ears, stream-reactive RGB lighting, detachable cardioid microphone and 7.1 surround sound on 50 mm drivers

  • CompatibilityPC PlayStation Nintendo Switch (docked mode)
  • ColorBlack
  • Connection TypeWired
  • ConnectorUSB
  • Cord Length2.0 m / 6.74 ft
  • Audio Type7.1 Surround Sound
  • Interchangeable Kitty, Bear and Bunny ears let you change the look instantly
  • Stream-reactive lighting on ears and earcups responds to emotes and alerts in 16.8 million colours
  • Detachable HyperClear cardioid mic focuses on your voice while rejecting off-axis noise
  • TriForce Titanium 50 mm drivers deliver distinct highs, mids and lows without muddiness
  • 1 surround sound provides accurate positional audio on Windows 10 64-bit

Interchangeable Kitty Bear Bunny Ears

The Razer Kraken Kitty V2 Pro is a wired USB gaming headset compatible with PC, PlayStation and Nintendo Switch in docked mode. It includes three magnetic ear designs that snap onto the earcups so streamers and creators can change their on-camera look without tools. The oval hybrid fabric and leatherette cushions provide passive noise isolation for long sessions.

Upgrade From Basic Stereo Headsets

Moving to this model adds TriForce Titanium 50mm drivers with a 20Hz-20KHz response, 32 ohm impedance and 96dB sensitivity plus Windows 10 64-bit 7.1 surround sound for positional audio. The detachable HyperClear cardioid microphone operates at 100Hz-10KHz with -42 dB sensitivity, replacing built-in mics that pick up keyboard and room noise. Stream reactive lighting across 16.8 million colours reacts to alerts and emotes for audience engagement.

Build Integration USB Power And 2m Cable

A single USB connector carries audio, microphone and lighting power so no separate audio jacks or external power supply are required. The 2.0 metre cord reaches rear motherboard ports on full-size desks. At 332 grams the headset stays light during extended wear and each ear set adds only 20 to 33.5 grams. The detachable 10.8 gram microphone removes cleanly when only listening is needed.

Highlights

  • Interchangeable Kitty, Bear and Bunny ears let you change the look instantly
  • Stream-reactive lighting on ears and earcups responds to emotes and alerts in 16.8 million colours
  • Detachable HyperClear cardioid mic focuses on your voice while rejecting off-axis noise
  • TriForce Titanium 50 mm drivers deliver distinct highs, mids and lows without muddiness
  • 1 surround sound provides accurate positional audio on Windows 10 64-bit

Specifications

BrandRazer
ModelKraken Kitty V2 Pro
Part NumberRZ04-04510100-R3U1
CompatibilityPC
PlayStation
Nintendo Switch (docked mode)
ColorBlack
Connection TypeWired
ConnectorUSB
Cord Length2.0 m / 6.74 ft
Audio Type7.1 Surround Sound
Driver Unit50mm
Headphone Frequency Response20Hz-20KHz
Headphone Input Impedance32 ohm
Headphone Sensitivity96dB S.P.L. at 1KHz
Noise CancellingPassive
Ear CouplingOval Ear Cushions
Weight332g / 0.76 lbs (Headset only)
20g / 0.44 lbs (1 Kitty ear only)
20g / 0.44 lbs (1 Bear ear only)
33.5g / 0.074 lbs (1 Bunny ear only)
10.8g / 0.0234 lbs (Detachable Mic)
Microphone Frequency Response100Hz-10KHz
Microphone Sensitivity-42 ± 3 dB (@1KHZ)
FeaturesInterchangeable Kitty, Bear, and Bunny Ears
Stream Reactive Lighting
Detachable Razer™ HyperClear Cardioid Mic
Shipping weight1.14 kg
Package size267 × 253 × 107 mm

Questions about this item

What USB connector and cable length does the Kraken Kitty V2 Pro need to reach my PC or console?

The headset uses a USB connector with a 2.0 m cord, so ensure your USB port is within that distance.

How do I swap the Kitty, Bear, and Bunny ears, and what step do people miss?

Snap the chosen ear set onto the headset frame until it clicks; the step often missed is fully seating both sides so the lighting contacts connect.

Which parts of the Kraken Kitty V2 Pro wear out and need replacement later?

The oval ear cushions and detachable HyperClear cardioid mic are the components that typically need replacement after extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.