We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 1 metre SeaTalkng backbone cable with extender plugs at both ends

Raymarine

Raymarine A06034 SeaTalkng 1M Backbone Cable with Extender

SKU CH-QS55-JCAK6 MPN A06034

One-metre SeaTalkng backbone cable with extender carries data and power to devices connected via spur cables

  • TypeAccessories
  • ColorBlue
  • Color MappingBlue
  • 1 m backbone cable spans the boat length
  • SeaTalkng backbone carries data and power to devices
  • Spur cables connect instruments to the backbone
  • Backbone extender included for flexible routing
  • Blue colour aids quick identification in the bilge

1 metre SeaTalkng backbone cable

The Raymarine A06034 is a one metre backbone cable with a plug at each end. It forms the central data and power bus that runs the length of a boat. Devices attach through spur cables to T‑pieces on the backbone. The cable carries both data and power to connected instruments.

Upgrading from shorter or damaged backbone sections

Replace a shorter backbone when the bus does not reach every planned device location. Swap a corroded or cut section to restore reliable power and data transmission. The jump is worth it when the existing backbone cannot pass all mounting points or shows intermittent faults.

Fits a SeaTalkng or NMEA 2000 network backbone

Connects directly to SeaTalkng T‑pieces and backbone extenders without adapters. The plug‑and‑play design frees installers from soldering or crimping. No external power supply is needed because the bus delivers power to attached devices. Not for builders who need longer single runs without additional extenders.

Highlights

  • 1 m backbone cable spans the boat length
  • SeaTalkng backbone carries data and power to devices
  • Spur cables connect instruments to the backbone
  • Backbone extender included for flexible routing
  • Blue colour aids quick identification in the bilge

Specifications

BrandRaymarine
TypeAccessories
ColorBlue
Color MappingBlue
Shipping weight1.81 kg
Package size203 × 152 × 102 mm

Questions about this item

What length backbone cable and connector type does the A06034 provide for routing through the boat?

The A06034 supplies a 1 metre SeaTalkng backbone cable with a plug at each end for running the length of the vessel.

How do devices join the backbone, and what common mistake should be avoided when adding a T-piece?

Devices attach via spur cables that run to T-pieces on the backbone; the frequent error is connecting a spur directly to the backbone without a T-piece.

Which component may need replacement if the backbone run must be extended beyond the supplied 1 metre length?

A SeaTalkng backbone extender or additional backbone cable sections are required to lengthen the run past every device location.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.