We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
CNC aluminium tripod leveler with magnetic bubble level and three adjustment knobs

RAUBAY

RAUBAY Tripod Leveler Stand for Seestar S50 ±6° LB-01

SKU CH-CRRR-GW1GQ

A ±6° leveling base with three adjustment knobs and a detachable magnetic bubble level for the Seestar S50 and standard 3/8″ tripod heads

  • TypeTripod Leveling Base
  • CompatibilityAstronomical Telescope, Ball Head, Fluid Head, Gimbal Head
  • Size4.3 x 4.1 x 3.1 in
  • Smooth micro-adjustment with ±6° precision control knobs
  • Detachable magnetic bubble level for independent angle checking
  • CNC machined anodized aluminium for strength and corrosion resistance
  • Universal 3/8" screw and thread fits most tripods and heads
  • Supports 360° panoramic and astronomical observation setups

For Seestar S50 and compatible heads

The RAUBAY LB-01 leveling base fits the Seestar S50 telescope and accepts ball, fluid or gimbal heads via its standard 3/8" top screw. It provides a stable platform for panoramic shooting, immersive content creation or astronomical observation. Builders needing a different thread size or a larger payload capacity should look elsewhere.

Install with three knobs and a magnetic level

Mount the base between tripod and head using the 3/8" bottom thread, then turn the three precision control knobs for smooth micro-adjustment across a ±6° range. A detachable magnetic bubble level snaps onto the base or any ferrous surface for independent angle checks. No tools are required, but the knobs must be tightened evenly to avoid binding.

±6° adjustment range sets the levelling limit

The single specification that decides fit is the ±6° tilt range delivered by the three control knobs. If your shooting site demands more than six degrees of correction, this base cannot compensate. The anodized CNC aluminium construction measures 4.3 x 4.1 x 3.1 in and resists wear and corrosion for long-term outdoor use.

Highlights

  • Smooth micro-adjustment with ±6° precision control knobs
  • Detachable magnetic bubble level for independent angle checking
  • CNC machined anodized aluminium for strength and corrosion resistance
  • Universal 3/8" screw and thread fits most tripods and heads
  • Supports 360° panoramic and astronomical observation setups

Specifications

Brandraubay
TypeTripod Leveling Base
CompatibilityAstronomical Telescope, Ball Head, Fluid Head, Gimbal Head
Size4.3 x 4.1 x 3.1 in

Questions about this item

How do I verify the ±6° leveling is working after mounting the Seestar S50?

Use the detachable magnetic bubble level on the base or directly on the gear; adjust the three precision control knobs until the bubble centres, confirming the fine-tune range is active.

What comes in the box and what must I buy separately?

The leveling base LB-01 with its detachable magnetic bubble level is included; a tripod, ball head, fluid head, gimbal head or slider with a standard 3/8" thread must be supplied separately.

Which version of the RAUBAY leveler should I choose for panoramic and astronomy use?

The single LB-01 model covers both 360° panoramic shooting and astronomical observation with its ±6° micro-adjustment, CNC aluminium build and universal 3/8" top and bottom threads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.