We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3 UDIMM sticks with gold contacts and black heat spreaders

RASALAS

RASALAS 16GB Kit (4x4GB) DDR3 1333MHz PC3-10600 1.5V CL9 240-pin UDIMM desktop RAM

SKU CH-CF0M-N44FT

A 16 GB kit of four 4 GB DDR3 1333 MHz modules running at 1.5 V with CL9 timing and 240-pin UDIMM form factor

  • 16 GB total capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive desktop performance
  • 5 V JEDEC standard voltage for broad motherboard compatibility
  • 240-pin UDIMM form factor fits standard desktop slots
  • Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation

Kit Configuration

This RASALAS kit contains four 4 GB DDR3 modules for a total of 16 GB. It is built for desktop systems that use 240-pin UDIMM slots and run at 1333 MHz PC3-10600 speed. The dual-rank 2Rx8 layout suits mainstream office PCs and older workstations.

Voltage Flexibility

Each stick is a dual-voltage part rated for JEDEC 1.5 V operation and can also run at 1.35 V. This lets the memory work in boards that require either voltage without manual adjustment. The CL9 latency and non-ECC unbuffered design keep timing straightforward.

Platform Check

Verify that your motherboard supports DDR3 UDIMM at 1333 MHz and accepts 1.5 V or 1.35 V modules. Confirm the board has four free 240-pin slots and can handle 16 GB total capacity. Systems limited to lower density or single-rank only will not work with this kit.

Highlights

  • 16 GB total capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive desktop performance
  • 5 V JEDEC standard voltage for broad motherboard compatibility
  • 240-pin UDIMM form factor fits standard desktop slots
  • Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation

Specifications

No published specifications for this item yet.

Questions about this item

Will the 1.5 V DDR3 modules need any firmware updates or re-seating over time?

No firmware is involved; the 240-pin UDIMM sticks are passive components. If a slot oxidises, removing and re-inserting the module usually restores contact.

What speed ceiling will the 1333 MHz kit hit first during long rendering sessions?

The JEDEC-rated 1333 MHz clock is the hard limit; the memory controller will not push the PC3-10600 modules beyond that frequency.

How much heat and power will the 1.5 V dual-rank kit add when the desktop runs all day?

Each 4 GB module draws power at the standard 1.5 V (or 1.35 V) JEDEC voltage, producing only modest warmth that a normal case airflow handles.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.