We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small spools of multicoloured PLA filament in cardboard box

RAMBERY Silk Matte Rainbow PLA 1.75mm 4×200g

SKU CH-0M2T-XHQX5

A four-spool bundle of 1.75 mm rainbow PLA in shiny and matte finishes, each 200 g with 45 colour transitions per roll, vacuum-sealed and precision-wound for tangle-free printing at 210–240 °C

  • ColorMulticolored
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1.76 pounds
  • Four distinct rainbow finishes in one bundle
  • 45 colour shifts per spool for vibrant prints
  • Dimensional tolerance ±0.02 mm for reliable feeding
  • Vacuum-sealed spools prevent moisture and tangling
  • Prints at 210–240 °C with 35–45 °C bed

Four-colour filament bundle

RAMBERY Silk Matte Rainbow PLA ships as four 200 g spools of 1.75 mm polylactic acid. The pack contains one spool each of Shiny Candy, Shiny Macaron, Shiny Universe and Matte Rainbow finishes. Every spool is vacuum-sealed after drying to keep moisture out.

Makers who want colour variety

Hobbyists printing decorative models, gifts or display pieces benefit from having four distinct rainbow effects in a single purchase. Users who need engineering-grade strength, high-temperature resistance or a single consistent colour for functional parts should choose a different material.

Diameter tolerance decides fit

The filament is held to 1.75 mm ±0.02 mm, a tolerance that determines whether it feeds reliably in a given extruder. Printers with tighter or looser feed paths may jam or under-extrude if the actual diameter drifts outside this window.

Highlights

  • Four distinct rainbow finishes in one bundle
  • 45 colour shifts per spool for vibrant prints
  • Dimensional tolerance ±0.02 mm for reliable feeding
  • Vacuum-sealed spools prevent moisture and tangling
  • Prints at 210–240 °C with 35–45 °C bed

Specifications

BrandRAMBERY
ModelVM-T940-ETCS
ColorMulticolored
MaterialPolylactic Acid
Diameter1.75
Weight1.76 pounds

Questions about this item

Will the 1.75 mm diameter stay within the ±0.02 mm tolerance after months of storage?

Each spool is vacuum-sealed and dried before shipping, which preserves the tight diameter tolerance and prevents moisture from degrading the filament over time.

At 240 °C nozzle temperature, will the PLA start to degrade during long prints?

The recommended print range tops out at 240 °C; staying at or below that limit avoids thermal degradation even on extended jobs.

Does the rainbow colour change add extra heat or noise during all-day printing?

The colour shift is purely cosmetic — no additional heat, power draw or noise is introduced compared with standard PLA.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.